Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001FQOR
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 - 10/2023]
Title: DOOR / HATCH: POWER BACK DOOR SYSTEM (for Gasoline Model): INITIALIZATION; 2019 - 2023 MY RAV4 [11/2018 - 10/2023]

INITIALIZATION

INITIALIZE MULTIPLEX NETWORK DOOR ECU

NOTICE:

Initialization of the multiplex network door ECU (back door initial position learning) is necessary if the following work procedures are performed while the back door is open.

  • The cable to the negative (-) battery terminal is connected.
  • A power source system fuse of the power back door system is disconnected and reconnected.
  • The multiplex network door ECU is replaced or the connectors are disconnected.

The power back door does not operate unless the multiplex network door ECU is initialized.

HINT:

  • Initialization is not necessary if the above procedures are performed while the back door is closed.
  • When disconnecting the negative (-) battery terminal, some systems need to be initialized after the negative (-) battery terminal is reconnected.

    Click here 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2019 MY RAV4 RAV4 HV [02/2019 - 10/2019]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2020 MY RAV4 RAV4 HV [10/2019 - 06/2020]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2020 MY RAV4 RAV4 HV [06/2020 - 08/2020]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2021 MY RAV4 RAV4 HV [08/2020 - 12/2021]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2022 MY RAV4 RAV4 HV [12/2021 - 10/2022]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION 2023 MY RAV4 RAV4 HV [10/2022 - 10/2023]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION

(a) Initialization operation

(1) Fully close the back door by hand.