Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001FREN |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 - 10/2022] |
Title: PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for Gasoline Model): C2A6A; Back Camera Response Malfunction; 2019 - 2022 MY RAV4 [11/2018 - 10/2022] |
DTC
|
C2A6A
|
Back Camera Response Malfunction
|
DESCRIPTION
During self diagnosis of the parking assist ECU, the parking assist ECU sends display mode ID signals to the television camera assembly. This DTC is stored when the output of the television camera assembly does not match the expected output.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C2A6A
|
Back Camera Response Malfunction
|
Abnormal response from the television camera assembly
|
-
Television camera assembly
-
Parking assist ECU
|
CAUTION / NOTICE / HINT
NOTICE:
-
When "!" mark is displayed on the radio and display receiver assembly after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.
Click here
-
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.
Click here
PROCEDURE
(a) Clear the DTCs.
Click here
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
(b) Check for DTCs.
Click here
Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
OK:
DTC C2A6A is not output.
NG
|
|
|
2.
|
REPLACE TELEVISION CAMERA ASSEMBLY
|
(a) Replace the television camera assembly with a new or normally functioning one.
Click here
NEXT
|
|
|
(a) Clear the DTCs.
Click here
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
(b) Check for DTCs.
Click here
Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
OK:
DTC C2A6A is not output.
OK |
|
END (TELEVISION CAMERA ASSEMBLY IS DEFECTIVE)
|
|