Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001FREO |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 - 10/2022] |
Title: PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for Gasoline Model): U0073,U0100,U0126,U0129,U0140,U0163,U0233,U0265,U1110; Control Module Communication Bus Off; 2019 - 2022 MY RAV4 [11/2018 - 10/2022] |
DTC
|
U0073
|
Control Module Communication Bus Off
|
DTC
|
U0100
|
Lost Communication with ECM / PCM "A"
|
DTC
|
U0126
|
Lost Communication with Steering Angle Sensor Module
|
DTC
|
U0129
|
Lost Communication with Brake System Control Module
|
DTC
|
U0140
|
Lost Communication with Body Control Module
|
DTC
|
U0163
|
Lost Communication With Navigation Control Module
|
DTC
|
U0233
|
Lost Communication with Blind Spot Monitor Master Module
|
DTC
|
U0265
|
Lost Communication with Image Processing Sensor A
|
DTC
|
U1110
|
Lost Communication with Clearance Sonar Module
|
DESCRIPTION
These DTCs are stored if there is a malfunction in the CAN communication system connected to the parking assist ECU.
HINT:
If CAN communication system DTCs are stored, they may also be stored in other systems.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
U0073
|
Control Module Communication Bus Off
|
Control module communication bus off
|
CAN communication system
|
U0100
|
Lost Communication with ECM / PCM "A"
|
Lost communication with ECM
|
CAN communication system
|
U0126
|
Lost Communication with Steering Angle Sensor Module
|
Lost communication with steering sensor
|
CAN communication system
|
U0129
|
Lost Communication with Brake System Control Module
|
Lost communication with brake actuator assembly (skid control ECU)
|
CAN communication system
|
U0140
|
Lost Communication with Body Control Module
|
Lost communication with main body ECU (multiplex network body ECU)
|
CAN communication system
|
U0163
|
Lost Communication With Navigation Control Module
|
Lost communication with radio and display receiver assembly
|
CAN communication system
|
U0233
|
Lost Communication with Blind Spot Monitor Master Module
|
Lost communication with blind spot monitor sensor LH
|
CAN communication system
|
U0265
|
Lost Communication with Image Processing Sensor A
|
Lost communication with television camera assembly
|
CAN communication system
|
U1110
|
Lost Communication with Clearance Sonar Module
|
Lost communication with clearance warning ECU assembly
|
CAN communication system
|
PROCEDURE
(a) Clear the DTCs.
Click here
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
(b) Check for DTCs.
Click here
Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
Result
|
Proceed to
|
DTC U0073, U0100, U0126, U0129, U0140, U0163, U0233, U0265 or U1110 is not output
|
A
|
DTC U0073, U0100, U0126, U0129, U0140, U0163, U0233, U0265 and U1110 are not output
|
B
|
HINT:
-
If CAN communication system DTCs are stored, they may also be stored in other systems.
-
If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
-
If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs.
Click here
|