Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001FW6Y |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 -
] |
Title: DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: All Doors LOCK/UNLOCK Functions do not Operate Via Master Switch; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] |
All Doors LOCK/UNLOCK Functions do not Operate Via Master Switch
|
DESCRIPTION
The main body ECU (multiplex network body ECU) receives switch signals from the multiplex network master switch assembly via LIN communication system. The main body ECU (multiplex network body ECU) activates the door lock motor on each door according to these signals.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
*: w/ Smart Key System
PROCEDURE
1.
|
READ VALUE USING TECHSTREAM (Door Lock Switch Status, Door Unlock Switch Status)
|
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Master Switch / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > Master Switch > Data List
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
Door Lock Switch Status
|
Multiplex network master switch assembly lock signal
|
OFF or ON
|
OFF: Lock side of multiplex network master switch assembly not pushed
ON: Lock side of multiplex network master switch assembly pushed
|
-
|
Door Unlock Switch Status
|
Multiplex network master switch assembly unlock signal
|
OFF or ON
|
OFF: Unlock side of multiplex network master switch assembly not pushed
ON: Unlock side of multiplex network master switch assembly pushed
|
-
|
Body Electrical > Master Switch > Data List
Tester Display
|
Door Lock Switch Status
|
Door Unlock Switch Status
|
OK:
On the Techstream screen, ON or OFF is displayed for each item according to the table above.
|