| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FWEJ |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 12/2021] |
| Title: LIGHTING (EXT): LIGHTING SYSTEM (w/ Headlight ECU without AFS): CUSTOMIZE PARAMETERS; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021] | ||
CUSTOMIZE PARAMETERS
CUSTOMIZE LIGHTING SYSTEM (EXT) (w/ Headlight ECU)
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Light Control or Warning.
(5) Select the setting by referring to the table below.
Light Control
|
Tester Display |
Description |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
Response Time |
Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position. |
Normal |
0:Normal,1:Long |
Main Body ECU (Multiplex Network Body ECU) |
|
Disp Ex ON Sen |
Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A |
NORMAL |
000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 |
Main Body ECU (Multiplex Network Body ECU) |
|
Disp Ex OFF Sen |
Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B |
NORMAL |
000:NORMAL,001:DARK2,010:DARK1,011:LIGHT1,100:LIGHT2 |
Main Body ECU (Multiplex Network Body ECU) |
|
Sensitivity |
Adjusts the sensitivity of the automatic light control system.*C |
Normal |
000:Normal,001:Dark2,010:Dark1,011:Light1,100:Light2 |
Main Body ECU (Multiplex Network Body ECU) |
|
Tail Remind Buzzer Function |
Sounds a buzzer when the driver door is opened with the light control switch in the TAIL or HEAD position. |
ON |
0:OFF,1:ON |
Main Body ECU (Multiplex Network Body ECU) |
|
Auto Light Off Timing Setting |
Sets the timing to turn off the taillights when the light control switch is in the TAIL or HEAD position. |
Door Open |
0:IG OFF,1:Door Open |
Main Body ECU (Multiplex Network Body ECU) |
HINT:
The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
-
*A
-
*B
-
*C
Warning
|
Tester Display |
Description |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
Lane Change Flashing Times Adjust |
Function to change the lane change flashing times. |
3 |
$00:OFF,$01:3,$02:4,$03:5,$04:6,$05:7 |
Combination Meter Assembly |
|
Suggestion Service Function |
Turns the suggestion service function on/off. |
ON |
00:OFF,01:Only Parked,11:ON |
Main body ECU (Multiplex Network Body ECU) |
(b) Customizing with the multi-display
(1) Turn the ignition switch to ON.
(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Lights settings.
(3) Select the setting by referring to the table below.
|
Display |
Default |
Content |
Setting |
Relevant ECU |
|---|---|---|---|---|
|
Light Sensor sensitivity |
0 |
Adjusts the sensitivity of the automatic light control system.*A |
-2, -1, 0, +1 or +2 |
Main Body ECU (Multiplex Network Body ECU) |
HINT:
The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
-
*A
|
|