| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001FWQA |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 08/2020] |
| Title: DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System): DIAGNOSIS SYSTEM; 2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020] | ||
DIAGNOSIS SYSTEM
SELF-DIAGNOSTIC MODE (USING TECHSTREAM)
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Utility / Wireless Door Lock Diagnosis Mode.
Body Electrical > Main Body > Utility
|
Tester Display |
|---|
|
Wireless Door Lock Diagnosis Mode |
(e) Proceed to the next step in accordance with the prompts on the Techstream screen.
(f) Check that the system has switched to self-diagnostic mode by checking the interior light output pattern.
(g) Check that the system has switched to self-diagnostic mode by checking the wireless door lock buzzer output pattern. (w/ Wireless Door Lock Buzzer Answer-back Function)
(h) Check the diagnostic outputs when a door control transmitter module set sub-assembly switch is pressed. The diagnostic outputs can be checked by the interior light patterns.
Result:
|
Interior Light Output |
Suspected Area |
|---|---|
|
A |
Normal (No malfunction) |
|
B |
Register wireless code |
|
C |
Wave interference or malfunction of a related component |
(i) Check the diagnostic outputs when a door control transmitter module set sub-assembly switch is pressed. The diagnostic outputs can be checked by the wireless door lock buzzer patterns. (w/ Wireless Door Lock Buzzer Answer-back Function)
Result:
|
Interior Light Output |
Suspected Area |
|---|---|
|
A |
Normal (No malfunction) |
|
B |
Register wireless code |
|
C |
Wave interference or malfunction of a related component |
|
|