Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001FWRI
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: LIGHTING (INT): LIGHTING SYSTEM: DATA LIST / ACTIVE TEST; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main Body / Data List.

(e) Read the Data List according to the display on the Techstream.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

ACC SW

Ignition switch ACC signal

OFF or ON

ON: Ignition switch ACC

OFF: Ignition switch off

"ON" is also displayed for this item when the ignition switch is ON.

IG SW

Ignition switch ON signal

OFF or ON

ON: Ignition switch ON

OFF: Ignition switch off

"OFF" is also displayed for this item when the ignition switch is ACC.

RR Door Courtesy SW

Rear door courtesy light switch assembly RH signal

OFF or ON

OFF: Rear door RH closed

ON: Rear door RH open

-

RL Door Courtesy SW

Rear door courtesy light switch assembly LH signal

OFF or ON

OFF: Rear door LH closed

ON: Rear door LH open

-

Back Door Courtesy SW

Back door courtesy light switch signal

OFF or ON

OFF: Back door closed

ON: Back door open

-

FR Door Lock Pos

Front door RH unlock detection switch signal

LOCK or UNLOCK

LOCK: Front door RH locked

UNLOCK: Front door RH unlocked

-

FR Door Courtesy SW

Front door courtesy light switch assembly RH signal

OFF or ON

OFF: Front door RH closed

ON: Front door RH open

-

FL Door Lock Pos

Front door LH unlock detection switch signal

LOCK or UNLOCK

LOCK: Front door LH locked

UNLOCK: Front door LH unlocked

-

FL Door Courtesy SW

Front door courtesy light switch assembly LH signal

OFF or ON

OFF: Front door LH closed

ON: Front door LH open

-

RR-Door Lock Pos SW

Rear door RH unlock detection switch signal*1

Rear door RH and rear door LH unlock detection switch signal*2

OFF or ON

OFF: Rear door RH unlocked*1

OFF: Rear door RH and rear door LH unlocked*2

ON: Rear door RH locked*1

ON: Rear door RH or rear door LH locked*2

-

RL-Door Lock Pos SW

Rear door LH unlock detection switch signal*1

Rear door LH and rear door RH unlock detection switch signal*2

OFF or ON

OFF: Rear door LH unlocked*1

OFF: Rear door LH and rear door RH unlocked*2

ON: Rear door LH locked*1

ON: Rear door LH or rear door RH locked*2

-

Interior Light Control

Operation of the illuminated entry system

OFF or ON

Customized setting displayed

Displayed only when All Data is selected.

I/L ON W/Door Key Unlock

Function that lights up the interior lights when the doors are unlocked

OFF or ON

Customized setting displayed

Displayed only when All Data is selected.

Lighting Time

Lighting time of the delay control function (illuminated entry system)

15s, 7.5s or 30s

Customized setting displayed

Displayed only when All Data is selected.

Room Light when Aprchd

Function that lights up the interior lights when a key enters any actuation area

OFF or ON

Customized setting displayed

Displayed only when All Data is selected.

Inside Foot Light

Function that lights up the No. 1 interior illumination light assembly (footwell light)*3

OFF or ON

Customized setting displayed

Displayed only when All Data is selected.

I/L when ACC OFF

Function that lights up the interior lights when the ignition switch is turned from ACC or ON to off

OFF or ON

Customized setting displayed

Displayed only when All Data is selected.

Light Control

Function that lights up the ambient lights (while driving)

OFF or ON

Customized setting displayed

Displayed only when All Data is selected.
  • *1: w/ Memory Call Function
  • *2: w/o Memory Call Function
  • *3: w/ Footwell Light

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus:

(1) Body Electrical / Main Body / Active Test.

(2) Body Electrical / Smart Key / Active Test.*

  • *: w/ Smart Key System

(e) Perform the Active Test according to the display on the Techstream.

Body Electrical > Main Body > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Illuminated Entry System

Turns on the lights that are controlled by the illuminated entry system*1

OFF or ON

Perform the Active Test with the DOOR switch in the map light assembly and No. 1 room light assembly turned on.

Fr Foot Light

Operation of the following lights:

  • No. 1 interior illumination light assembly (footwell light)
  • No. 2 interior illumination light assembly (footwell light)
  • No. 3 interior illumination light assembly (center tray light)*2
  • No. 4 interior illumination light assembly (driver side tray light)*2
  • No. 5 interior illumination light assembly (front passenger side tray light)*2
  • No. 6 interior illumination light assembly (cup holder light)*3

OFF or ON

w/ Footwell Light

Relay for Interior Light Auto Cut Function

DOME CUT relay

DOME CUT relay

When performing this Active Test, turn all the interior lights on.

  • OFF: DOME CUT relay on (interior lights turn on)
  • ON: DOME CUT relay off (interior lights turn off)

Dimmer Signal

Outputs night mode (dimmer signal)

OFF or ON

-
  • *1: Refer to Operation Check for the lights that are controlled by the illuminated entry system.

    Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; LIGHTING (INT): LIGHTING SYSTEM: OPERATION CHECK

  • *2: w/ Tray Light
  • *3: w/ Cup Holder Light

Body Electrical > Smart Key > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Power/Engine SW Light

Push start switch illumination

OFF or ON

-