Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001G0OV
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VSC OFF SWITCH: INSPECTION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]

INSPECTION

PROCEDURE

1. INSPECT VSC OFF SWITCH

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

5 (+) - 2 (E)

Pushed

Below 1 Ω

Not pushed

10 kΩ or higher

If the result is not as specified, replace the VSC OFF switch.

*a

Component without harness connected

VSC OFF Switch)

(b) Apply battery voltage between the terminals of the switch, and check the illumination condition of the VSC OFF switch.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → 6 (ILL+)

Battery negative (-) → 1 (ILL-)

Illuminates

If the result is not as specified, replace the VSC OFF switch.

*a

Component without harness connected

(VSC OFF Switch)