Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001G0P0
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE HOLD SWITCH: INSPECTION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]

INSPECTION

PROCEDURE

1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (BRAKE HOLD SWITCH)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

15 (E) - 24 (+B)

Switch pushed

Below 1 Ω

15 (E) - 24 (+B)

Switch not pushed

10 kΩ or higher

HINT:

If the result is not as specified, replace the integration control and panel assembly (brake hold switch).

*a

Component without harness connected

Integration Control and Panel Assembly

(Brake Hold Switch)