Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001G0QF |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 -
] |
Title: BRAKE SYSTEM (OTHER): VACUUM PUMP (for A25A-FKS): INSTALLATION; 2019 - 2024 MY RAV4 [11/2018 - ] |
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
PROCEDURE
1. INSTALL VACUUM PUMP ASSEMBLY
(a) When reusing the vacuum pump assembly:
(1) Install a new No. 1 vacuum pump O-ring to the vacuum pump assembly.
|
|
(b) Install the vacuum pump assembly so that the coupling teeth of the vacuum pump assembly and groove of the camshaft are engaged.
NOTICE:
-
Ensure that the vacuum pump assembly is installed securely.
-
Be careful not to pinch the No. 1 vacuum pump O-ring.
|
|
*a
|
Coupling Teeth
|
*b
|
Groove
|
|
|
(c) Using an 8 mm socket wrench, install the vacuum pump assembly with the 3 bolts.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
NOTICE:
-
Perform the procedure by fully tightening the bolt (A), and then fully tightening the bolts (B).
-
After installation, check that there are no gaps between the matching surfaces and that the vacuum pump assembly is not installed at an angle.
|
|
2. CONNECT ENGINE WIRE
(a) Engage the clamp to connect the engine wire.
|
|
(b) Engage the clamp to connect the engine wire.
|
|
(c) Connect the connector and engine wire.
3. CONNECT NO. 1 VACUUM HOSE CONNECTOR
(a) Align the No. 1 vacuum hose connector with the vacuum pump assembly, and push them together until the No. 1 vacuum hose connector makes a "click" sound.
NOTICE:
-
Check that there is no foreign matter on the connecting parts.
-
After connecting the No. 1 vacuum hose connector, check that the vacuum pump assembly and No. 1 vacuum hose connector are securely connected by pulling on them.
4. INSPECT VACUUM PUMP OPERATION
Click here
|