Last Modified: 05-08-2025 6.11:8.1.0 Doc ID: RM100000001G0RB
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: PARKING BRAKE: ELECTRIC PARKING BRAKE ACTUATOR: INSTALLATION; 2019 - 2025 MY RAV4 RAV4 HV [11/2018 -        ]

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. INSTALL PARKING BRAKE ACTUATOR ASSEMBLY LH

(a) Apply a light coat of lithium soap base glycol grease to the new O-ring.

(b) Install the O-ring to the rear disc brake cylinder assembly.

NOTICE:

Make sure to replace the O-ring with a new one when installing the parking brake actuator assembly.

(c) Using a 5 mm hexagon socket wrench, install the parking brake actuator assembly LH with the 2 bolts.

Torque:

8.4 N·m {86 kgf·cm, 74 in·lbf}

2. CONNECT NO. 2 PARKING BRAKE WIRE ASSEMBLY

(a) Connect the No. 2 parking brake wire assembly connector to the parking brake actuator assembly.

NOTICE:

  • Remove any dirt or foreign matter on and around the No. 2 parking brake wire assembly connector before performing this work.
  • Do not allow water, oil or dirt to enter the No. 2 parking brake wire assembly connector.

3. INSTALL REAR WHEEL

Click here 2019 - 2025 MY RAV4 RAV4 HV [11/2018 -        ]; TIRE / WHEEL: TIRE AND WHEEL: INSTALLATION