DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM (for Gasoline Model, with Smart Key System): OPERATION CHECK; 2019 - 2020 MY RAV4 [11/2018

The operation check below is based on the non-customized initial condition of the vehicle.

HINT:

The switches described in this text are the switches for transmitting signals. The switches are built into the electrical key transmitter sub-assembly.
All the functions listed below must be checked in comparison with the wireless door lock control operation area.

(a) Check whether the LED of the electrical key transmitter sub-assembly comes on 3 times when each switch is pressed and held for 5 seconds.

HINT:

If the transmitter LED illuminates once or twice but not a third time when the switch has been pressed and held for 5 seconds or more, it may have a weak transmitter battery.
If the switch is held, the transmitter LED illuminates repeatedly.

(d) Check that the driver door unlocks when the unlock switch is pressed once, and all doors unlock when pressed twice within 3 seconds.*2

(e) Check that the back door opens or closes when the power back door switch is pressed and held for 0.8 seconds or more.*3

*1: Customize item "Unlock 2 Operation" or "Remote 2-Press unlock" is set to "OFF".
*2: Customize item "Unlock 2 Operation" or "Remote 2-Press unlock" is set to "ON".
*3: w/ Power Back Door System

(a) Check that the corresponding operation occurs only once and is not repeated continuously while the switch is held. However, when the switch is operated repeatedly at 1-second intervals, and check that the corresponding operation is carried out.

(a) Check that the doors cannot be locked/unlocked when operating a switch on an unregistered electrical key transmitter sub-assembly, but that the doors can be locked/unlocked when operating a switch on the registered electrical key transmitter sub-assembly.

(a) When the lock switch is pressed, check that the hazard warning lights flash once simultaneously with the locking operation of all doors.

(b) When the lock switch is pressed with any door open and then the doors are closed, check that the hazard warning lights flash once.*1,*5

(c) When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of all doors.*2

(d) When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of the driver door.*3

(e) When the back door is opened or closed by wireless operation, the hazard warning lights flash twice.*4

*1: Customize item "Wireless Lock Function with Doors Open" or "Wireless Lock When Door Opened" is set to "ON".
*2: Customize item "Unlock 2 Operation" or "Remote 2-Press unlock" is set to "OFF".
*3: Customize item "Unlock 2 Operation" or "Remote 2-Press unlock" is set to "ON".
*4: w/ Power Back Door Hazard Warning Light
*5: w/ Occupant Classification System

(a) When the lock switch is pressed, check that the buzzer sounds once simultaneously with the locking operation of all doors.

(b) When the lock switch is pressed with any door open and then the doors are closed, check that the buzzer sounds once.*1,*5

(c) When the unlock switch is pressed once, check that the buzzer sounds twice simultaneously with the unlocking operation of all doors.*2

(d) When the unlock switch is pressed once, check that the buzzer sounds twice simultaneously with the unlocking operation of the driver door.*3

(e) When the back door is opened or closed by wireless operation, the wireless door lock buzzer sounds.*4

*1: Customize item "Wireless Lock Function with Doors Open" or "Wireless Lock When Door Opened" is set to "ON".
*2: Customize item "Unlock 2 Operation" or "Remote 2-Press unlock" is set to "OFF".
*3: Customize item "Unlock 2 Operation" or "Remote 2-Press unlock" is set to "ON".
*4: w/ Power Back Door System
*5: w/ Occupant Classification System

(a) Check that the doors relock automatically as long as none of the doors have been opened or all doors have not been locked within approximately 30*1 or 60*2 seconds of all doors being unlocked by pressing the unlock switch.

(b) Check that the automatic locking function does not operate when any door has been opened within approximately 30*1 or 60*2 seconds of unlocking the doors by pressing the unlock switch.

(c) Check that the automatic locking function does not operate when all doors have been locked manually (such as using key linked operation, or by pressing the lock switch) within approximately 30*1 or 60*2 seconds of unlocking the doors by pressing the unlock switch.

*1: w/o Occupant Classification System
*2: w/ Occupant Classification System

When the wireless lock with doors open function is set to "ON", this function is canceled even if set to "ON".

(a) Check that the wireless door lock buzzer sounds for approximately 5 seconds when the lock switch is pressed with any of the doors ajar or open.

(a) With a door open or ajar, check that the doors cannot be locked when the lock switch is operated.

CHECK WIRELESS LOCK WITH DOORS OPEN FUNCTION (w/ Occupant Classification System)

When the wireless lock with doors open function is set to "ON", door ajar function is canceled even if the door ajar function is set to "ON".

(a) Check that the doors lock after the back door is closed when the electrical key transmitter sub-assembly lock switch is operated during the back door closing operation via the power back door function.