Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001G2BR
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 - 12/2021]
Title: LIGHTING (EXT): LIGHTING SYSTEM (w/ Headlight ECU without AFS): B2414; Steering Position Sensor; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021]

DTC

B2414

Steering Position Sensor

DESCRIPTION

The headlight ECU sub-assembly LH receives steering angle signals from the steering sensor via CAN communication and performs light control.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

Note

B2414

Steering Position Sensor

Detection condition:

  • The ignition switch is ON

Malfunction status:

  • Sensor malfunction signals are continuously received from the steering sensor

Malfunction duration:

  • 10 seconds or more

Electronically controlled brake system

HL AutoLeveling

-

WIRING DIAGRAM

PROCEDURE

1.

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / HL AutoLeveling / Clear DTCs.

(e) Clear the DTCs.

Body Electrical > HL AutoLeveling > Clear DTCs

NEXT

2.

CHECK FOR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Wait 10 seconds or more.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.

(f) Check for DTCs.

Body Electrical > HL AutoLeveling > Trouble Codes

OK:

DTC B2414 is not output.

OK

USE SIMULATION METHOD TO CHECK

NG

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM

for HV Model:

Click here 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): HOW TO PROCEED WITH TROUBLESHOOTING

for Gasoline Model:

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ Vacuum Brake Booster): HOW TO PROCEED WITH TROUBLESHOOTING