Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001H3NQ |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [02/2019 - 10/2019] |
Title: TIRE / WHEEL: TIRE AND WHEEL SYSTEM: INSPECTION; 2019 MY RAV4 RAV4 HV [02/2019 - 10/2019] |
INSPECTION
PROCEDURE
1. INSPECT TIRES
Cold Tire Inflation Pressure (for TMMC made):
Tire Size
|
Item
|
Front
kPa (kgf/cm2, psi)
|
Rear
kPa (kgf/cm2, psi)
|
225/65R17 102H
|
for 2WD
|
240 (2.4, 35)
|
240 (2.4, 35)
|
for AWD
for HV Model
|
250 (2.5, 36)
|
250 (2.5, 36)
|
225/60R18 100H
|
for HV Model
|
230 (2.3, 33)
|
230 (2.3, 33)
|
235/55R19 101V
|
for 2WD
|
230 (2.3, 33)
|
230 (2.3, 33)
|
for AWD
|
240 (2.4, 35)
|
240 (2.4, 35)
|
(a) Inspect the tires for wear and proper inflation pressure.
Cold Tire Inflation Pressure (for TMC made) (for North America):
Tire Size
|
Item
|
Front
kPa (kgf/cm2, psi)
|
Rear
kPa (kgf/cm2, psi)
|
225/65R17 102H
|
for 2WD
|
240 (2.4, 35)
|
240 (2.4, 35)
|
for AWD
for HV Model
|
250 (2.5, 36)
|
250 (2.5, 36)
|
225/60R18 100H
|
for HV Model
|
230 (2.3, 33)
|
230 (2.3, 33)
|
235/55R19 101V
|
for 2WD
|
230 (2.3, 33)
|
230 (2.3, 33)
|
for AWD
|
240 (2.4, 35)
|
240 (2.4, 35)
|
Cold Tire Inflation Pressure (for TMC made) (for Mexico):
Tire Size
|
Item
|
Front
kPa (kgf/cm2, psi)
|
Rear
kPa (kgf/cm2, psi)
|
225/65R17 102H
|
for 2WD
for AWD
|
230 (2.3, 33)
|
230 (2.3, 33)
|
225/60R18 100H
|
for AWD
for HV Model
|
230 (2.3, 33)
|
230 (2.3, 33)
|
235/55R19 101V
|
for AWD
|
230 (2.3, 33)
|
230 (2.3, 33)
|
Cold Tire Inflation Pressure (for Compact Spare Tire):
Tire Size
|
kPa (kgf/cm2, psi)
|
T165/80R17 104M
|
420 (4.2, 60)
|
T165/80D17 104M
|
T165/90D18 107M
|
(1) Perform initialization. (w/ Tire Pressure Warning System)
Click here
(2) Tire pressure adjustment method when warm (w/ Tire Pressure Warning System):
-
Turn the ignition switch off.
-
Connect the Techstream to the DLC3.
-
Turn the ignition switch to ON.
-
Turn the Techstream on.
-
Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
-
Adjust the tire pressure so that the displayed value is equal to the set pressure.
-
Perform initialization and check that initialization completes.
Click here
-
Check and record the value of the Data List item "Temperature in Tire". (Ts)
-
Check and record the ambient temperature during tire pressure adjustment. (Tm)
-
Readjust the tire pressure according to the difference between the tire internal temperature (Ts) and the ambient temperature (Tm). (P)
HINT:
Tire internal temperature: Ts, Ambient temperature: Tm, Tire pressure readjustment value: P
P = (Specified Pressure) + (Ts - Tm)
-
Check the pressure adjustment value with the Data List item "Tire Inflation Pressure".
Chassis > Tire Pressure Monitor > Data List
Tester Display
|
ID 1 Tire Inflation Pressure
|
ID 2 Tire Inflation Pressure
|
ID 3 Tire Inflation Pressure
|
ID 4 Tire Inflation Pressure
|
ID 5 Tire Inflation Pressure
|
NOTICE:
Check the tire pressure warning system for the relationship between the inflation pressure and tire pressure warning pressure.
Click here
(b) Using a dial indicator, check the runout of the tires.
Maximum Tire Runout:
1.4 mm (0.0551 in.)
|
|
2. ROTATE TIRES
(a) Remove the wheel assembly.
Click here
(b) If the spare tire uses a different type of wheel than the other tires, rotate the tires as shown by (a) in the illustration. If the spare tire has the same type of wheel as the other tires, rotate the tires, including the spare tire, as shown by (b) in the illustration.
*A
|
for North America
|
*B
|
for Mexico
|
*a
|
Vehicle Wheels and Spare Tire Wheel are Same Type
|
*b
|
Vehicle Wheels and Spare Tire Wheel are Not Same Type, or There is No Spare Tire
|
|
Front
|
(c) Install the wheel assembly.
Click here
(d) Perform initialization. (w/ Tire Pressure Warning System)
Click here
3. INSPECT AND ADJUST WHEEL BALANCE
(a) for Aluminum Wheel Type:
Inspect and adjust the off-the-car balance.
Maximum imbalance after adjustment:
8.0 g (0.0176 lb)
NOTICE:
-
Use a cleaning detergent to remove dirt, oil and water from the surface where the balance weight is to be adhered.
-
Do not touch the sticking surface of the tape.
-
Adhere a sticking type balance weight to the flat surface (A) shown in the illustration.
Width (A):
25 mm (0.984 in.)
-
Push the balance weight firmly to adhere it to the position.
-
Do not reuse the balance weight.
-
Use only TOYOTA genuine stick-on type balance weights or equivalent.
HINT:
-
The inner side balance weights should be installed by clipping them to the rim.
-
If necessary, check and adjust the on-the-car balance.
|
|
(b) for Steel Wheel Type:
Inspect and adjust the off-the-car balance.
Maximum imbalance after adjustment:
8.0 g (0.0176 lb)
HINT:
If necessary, check and adjust the on-the-car balance.
|
|
4. INSPECT FRONT AXLE HUB BEARING LOOSENESS
Click here
5. INSPECT FRONT AXLE HUB RUNOUT
Click here
6. INSPECT REAR AXLE HUB BEARING LOOSENESS
Click here
7. INSPECT REAR AXLE HUB RUNOUT
Click here
|