Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001H3ZI
Model Year Start: 2019 Model: RAV4 Prod Date Range: [02/2019 - 08/2020]
Title: HEATING / AIR CONDITIONING: COMBINATION SWITCH: INSPECTION; 2019 - 2020 MY RAV4 RAV4 HV [02/2019 - 08/2020]

INSPECTION

PROCEDURE

1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY

(a) Remove the shift lever knob sub-assembly.

(1) for HV Model:

Click here 2019 - 2024 MY RAV4 HV [11/2018 -        ]; P710 (HYBRID TRANSMISSION / TRANSAXLE): SHIFT LEVER KNOB: REMOVAL

(2) for Automatic Transaxle:

  • UB80E:

    Click here 2019 - 2024 MY RAV4 [11/2018 -        ]; UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT LEVER KNOB: REMOVAL

  • UB80F:

    Click here 2019 - 2024 MY RAV4 [11/2018 -        ]; UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT LEVER KNOB: REMOVAL

(b) Remove the upper console panel sub-assembly.

Click here 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL+

(c) for HV Model:

(1) Inspect the ECO mode switch

Measure the resistance according to the value(s) in the table below.

Standard Resistance (for 2WD):

Tester Connection

Condition

Specified Condition

7 (ECU) - 13 (GND)

ECO mode switch being pushed and held

Below 1 Ω

ECO mode switch not pushed

10 kΩ or higher

Standard Resistance (for AWD):

Tester Connection

Condition

Specified Condition

7 (ECU) - 13 (GND)

ECO mode switch being turned and held

Below 1 Ω

ECO mode switch not turned

10 kΩ or higher

If the result is not as specified, replace the integration control and panel assembly (combination switch).

*A

for 2WD

*B

for AWD

*a

Component without harness connected

(Integration Control and Panel Assembly (Combination Switch))

(d) for Automatic Transaxle:

(1) Inspect the ECO mode switch

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

7 (ECU) - 13 (GND)

ECO mode switch being pushed and held

Below 1 Ω

ECO mode switch not pushed

10 kΩ or higher

If the result is not as specified, replace the integration control and panel assembly (combination switch).

*a

Component without harness connected

(Integration Control and Panel Assembly (Combination Switch))

(e) Install the upper console panel sub-assembly.

Click here 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: INSTALLATION+

(f) Install the shift lever knob sub-assembly.

(1) for HV Model:

Click here 2019 - 2024 MY RAV4 HV [11/2018 -        ]; P710 (HYBRID TRANSMISSION / TRANSAXLE): SHIFT LEVER KNOB: INSTALLATION

(2) for Automatic Transaxle:

  • UB80E:

    Click here 2019 - 2024 MY RAV4 [11/2018 -        ]; UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT LEVER KNOB: INSTALLATION

  • UB80F:

    Click here 2019 - 2024 MY RAV4 [11/2018 -        ]; UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT LEVER KNOB: INSTALLATION