| 
                           Last Modified: 05-08-2025 | 
                        6.11:8.1.0  | 
                        
                           Doc ID: RM100000001H5IL | 
                      
                     
                        | 
                           Model Year Start: 2019 | 
                        
                           Model: RAV4 HV | 
                        
                           Prod Date Range: [02/2019 - 10/2023] | 
                      
                     
                        | 
                           Title: NETWORKING: CAN COMMUNICATION SYSTEM (for HV Model): Bus Buffer ECU Communication Stop Mode; 2019 - 2023 MY RAV4 HV [02/2019 - 10/2023] | 
                      
                   
                  
                     
                        
                           | 
                               Bus Buffer ECU Communication Stop Mode 
                            | 
                         
                     
                   
                   
                  DESCRIPTION
                  
                     
                        
                        
                        
                     
                     
                        
                           | 
                               Detection Item 
                            | 
                           
                               Symptom 
                            | 
                           
                               Trouble Area 
                            | 
                         
                     
                     
                        
                           | 
                               Bus Buffer ECU Communication Stop Mode 
                            | 
                           
                               Any of the following conditions are met: 
                              
                            | 
                           
                              
                                 
                                    - 
Option connector (bus buffer ECU) branch wire or connector
 
                                    - 
Option connector (bus buffer ECU)
 
                                  
                               
                            | 
                         
                     
                   
                   
                  WIRING DIAGRAM
                   
                   
                  CAUTION / NOTICE / HINT
                  CAUTION: 
                  When performing the confirmation driving pattern, obey all speed limits and traffic laws. 
                  
                  
                     HINT: 
                     
                        - 
Before disconnecting related connectors for inspection, push in on each connector body to check that the connector is not loose or disconnected.
 
                        - 
When a connector is disconnected, check that the terminals and connector body are not cracked, deformed or corroded.
 
                      
                   
                   
                  PROCEDURE
                   
                  
                  (a) Check whether dealer installed options that support CAN communication are installed. 
                  
                     
                        
                           | 
                               Result 
                            | 
                           
                               Proceed to 
                            | 
                         
                     
                     
                        
                           | 
                               Installed 
                            | 
                           
                               A 
                            | 
                         
                        
                           | 
                               Not installed 
                            | 
                           
                               B 
                            | 
                         
                     
                   
                  
                  
                     
                        
                           
                              
                                 | 
A
 | 
                               
                              
                                 
                                     
                                  | 
                               
                            
                         | 
                      
                   
                   
                  
                     
                        
                           | 
                               2.  
                            | 
                           
                               CHECK FOR OPEN IN CAN BUS WIRE (OPTION CONNECTOR [BUS BUFFER ECU] BRANCH WIRE) 
                            | 
                         
                     
                   
                  (a) Disconnect the cable from the negative (-) auxiliary battery terminal. 
                  
                     
                        
                           | 
                               (b) Disconnect the option connector (bus buffer ECU).* 
                              *: When a dealer-installed option is installed 
                            | 
                           
                              
                                 
                                    
                                        
                                     | 
                                  
                                 
                                    
                                       
                                          
                                             
                                             
                                          
                                          
                                             
                                                | 
                                                    *a 
                                                 | 
                                                
                                                    Front view of wire harness connector 
                                                   (to Option Connector [Bus Buffer ECU]) 
                                                 | 
                                              
                                          
                                        
                                     | 
                                  
                               
                            | 
                         
                     
                   
                  (c) Measure the resistance according to the value(s) in the table below. 
                  Standard Resistance:  
                  
                     
                        
                        
                        
                     
                     
                        
                           | 
                               Tester Connection 
                            | 
                           
                               Condition 
                            | 
                           
                               Specified Condition 
                            | 
                         
                     
                     
                        
                           | 
                               G80-2 (CAN+) - G80-1 (CAN-) 
                            | 
                           
                               Cable disconnected from negative (-) auxiliary battery terminal 
                            | 
                           
                               54 to 69 Ω 
                            | 
                         
                     
                   
                  
                     
                        
                           | OK | 
                           
                               
                            | 
                           
                               CHECK DEALER-INSTALLED OPTION 
                            | 
                         
                     
                   
                  
                     
                        
                           | NG | 
                           
                               
                            | 
                           
                               REPAIR OR REPLACE CAN BRANCH WIRE OR CONNECTOR 
                            | 
                         
                     
                   
                   
                  
                     
                        
                           | 
                               3.  
                            | 
                           
                               CHECK FOR OPEN IN CAN BUS WIRE (OPTION CONNECTOR [BUS BUFFER ECU] BRANCH WIRE) 
                            | 
                         
                     
                   
                  (a) Connect the Techstream to the DLC3. 
                  (b) Turn the ignition switch to ON. 
                  (c) Turn the Techstream on. 
                  (d) Enter the following menus: Body Electrical / Central Gateway / Utility / Initialization. 
                  Body Electrical > Central Gateway > Utility
                  
                     
                        
                     
                     
                        
                           | 
                               Tester Display 
                            | 
                         
                     
                     
                        
                           | 
                               Initialization 
                            | 
                         
                     
                   
                  (e) Enter the following menus: Body Electrical / Main Body / Utility / Initialization. 
                  Body Electrical > Main Body > Utility
                  
                     
                        
                     
                     
                        
                           | 
                               Tester Display 
                            | 
                         
                     
                     
                        
                           | 
                               Initialization 
                            | 
                         
                     
                   
                  (f) Enter the following menus: Body Electrical / Main Body / Clear DTCs. 
                  Body Electrical > Main Body > Clear DTCs
                  (g) Enter the following menus: Body Electrical / Main Body / Trouble Codes. 
                  Body Electrical > Main Body > Trouble Codes
                  
                     
                        
                           | 
                               Result 
                            | 
                           
                               Proceed to 
                            | 
                         
                     
                     
                        
                           | 
                               DTC U1117 is not output from main body ECU (multiplex network body ECU) 
                            | 
                           
                               A 
                            | 
                         
                        
                           | 
                               DTC U1117 is output from main body ECU (multiplex network body ECU) 
                            | 
                           
                               B 
                            | 
                         
                     
                   
                  
                     
                        
                           | A | 
                           
                               
                            | 
                           
                               END 
                            | 
                         
                     
                   
                  
                  
                |