Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001H5J2 |
Model Year Start: 2019 |
Model: RAV4 HV |
Prod Date Range: [02/2019 -
] |
Title: NETWORKING: CAN COMMUNICATION SYSTEM (for HV Model): Open in Bus 3 Main Bus Line; 2019 - 2024 MY RAV4 HV [02/2019 - ] |
Open in Bus 3 Main Bus Line
|
DESCRIPTION
There may be a short circuit between the CAN main bus wire and/or CAN branch wire when the resistance between terminals 6 (CA3H) and 21 (CA3L) or 19 (CAYH) and 20 (CAYL) of the central gateway ECU (network gateway ECU) is 70 Ω or higher.
Symptom
|
Trouble Area
|
-
Resistance between terminals 6 (CA3H) and 21 (CA3L) of the central gateway ECU (network gateway ECU) is 70 Ω or higher.
-
Resistance between terminals 19 (CAYH) and 20 (CAYL) of the central gateway ECU (network gateway ECU) is 70 Ω or higher.
|
-
CAN main bus wire or connector
-
Central gateway ECU (network gateway ECU)
-
No. 5 CAN junction connector
|
This malfunction is not related to the lines of a CAN branch or to ECUs or sensors connected to a CAN branch.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
CAUTION:
When performing the confirmation driving pattern, obey all speed limits and traffic laws.
HINT:
-
Before disconnecting related connectors for inspection, push in on each connector body to check that the connector is not loose or disconnected.
-
When a connector is disconnected, check that the terminals and connector body are not cracked, deformed or corroded.
PROCEDURE
1.
|
CHECK FOR OPEN IN CAN BUS WIRE (NO. 5 CAN JUNCTION CONNECTOR)
|
(a) Disconnect the cable from the negative (-) auxiliary battery terminal.
(b) Disconnect the No. 5 CAN junction connector.
*a
|
Front view of wire harness connector
(to No. 5 CAN Junction Connector)
|
*b
|
to Central Gateway ECU (Network Gateway ECU)
|
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
Connected to
|
G105-2 (CANH) - G105-13 (CANL)
|
Cable disconnected from negative (-) auxiliary battery terminal
|
108 to 132 Ω
|
Central gateway ECU (network gateway ECU)
|
G105-4 (CANH) - G105-15 (CANL)
|
Cable disconnected from negative (-) auxiliary battery terminal
|
108 to 132 Ω
|
Central gateway ECU (network gateway ECU)
|
Result
|
Proceed to
|
OK
|
A
|
NG (Central gateway ECU [network gateway ECU] CAN main wire)
|
B
|
A |
|
REPLACE NO. 5 CAN JUNCTION CONNECTOR
|
B
|
|
|
2.
|
CHECK FOR OPEN IN CAN BUS WIRE (CENTRAL GATEWAY ECU [NETWORK GATEWAY ECU] - NO. 5 CAN JUNCTION CONNECTOR)
|
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
G72-6 (CA3H) - G72-21 (CA3L)
|
Cable disconnected from negative (-) auxiliary battery terminal
|
108 to 132 Ω
|
G72-19 (CAYH) - G72-20 (CAYL)
|
|
|
*a
|
Component with harness connected
(to Central Gateway ECU [Network Gateway ECU])
|
|
|
OK |
|
REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CENTRAL GATEWAY ECU [NETWORK GATEWAY ECU] - NO. 5 CAN JUNCTION CONNECTOR)
|
|