| 
                           Last Modified: 05-08-2025 | 
                        6.11:8.1.0  | 
                        
                           Doc ID: RM100000001HCET | 
                      
                     
                        | 
                           Model Year Start: 2019 | 
                        
                           Model: RAV4 | 
                        
                           Prod Date Range: [02/2019 -                    
                                       ] | 
                      
                     
                        | 
                           Title: WIPER / WASHER: WASHER LEVEL WARNING SWITCH: REMOVAL; 2019 - 2025 MY RAV4 RAV4 HV [02/2019 -        ] | 
                      
                   
                  REMOVAL
                   
                  CAUTION / NOTICE / HINT
                  The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the level warning switch assembly removal/installation are shown below. 
                  Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
                  
                     
                        
                        
                        
                        
                     
                     
                        
                           | 
                               Replaced Part or Performed Procedure 
                            | 
                           
                               Necessary Procedure 
                            | 
                           
                               Effect/Inoperative Function when Necessary Procedure not Performed 
                            | 
                           
                               Link 
                            | 
                         
                     
                     
                        
                           | 
                               Front bumper assembly (Including removal and installation) 
                            | 
                           
                               Front television camera view adjustment 
                            | 
                           
                               Panoramic view monitor system (for HV model) 
                            | 
                           
                               
                                 
                                    
                                       
                                           
                                       
                                    
                                    
                                       
                                           
                                       
                                    
                                 
                               
                            | 
                         
                     
                   
                  Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
                  
                     
                        
                        
                        
                        
                     
                     
                        
                           | 
                               Replaced Part or Performed Procedure 
                            | 
                           
                               Necessary Procedure 
                            | 
                           
                               Effect/Inoperative Function when Necessary Procedure not Performed 
                            | 
                           
                               Link 
                            | 
                         
                     
                     
                        
                           | 
                               Front bumper assembly (Including removal and installation) 
                            | 
                           
                               Front television camera view adjustment 
                            | 
                           
                               Panoramic view monitor system (for Gasoline model) 
                            | 
                           
                               
                                 
                                    
                                       
                                           
                                       
                                    
                                    
                                       
                                           
                                       
                                    
                                 
                               
                            | 
                         
                     
                   
                   
                  PROCEDURE
                   
                  1. REMOVE FRONT BUMPER ASSEMBLY 
                  Click here
                        
                           
                               
                           
                        
                        
                           
                               
                           
                        
                        
                           
                               
                           
                        
                     
                   
                   
                  2. DRAIN WASHER FLUID 
                  Click here
                        
                           
                               
                           
                        
                        
                           
                               
                           
                        
                     
                   
                   
                  3. REMOVE LEVEL WARNING SWITCH ASSEMBLY 
                  (a) Disconnect the connector. 
                   
                  
                     
                        
                        
                     
                     
                        
                           
                               
                            | 
                           
                               Remove in this Direction 
                            | 
                         
                     
                   
                  (b) Remove the level warning switch assembly as shown in the illustration. 
                  
                |