Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001HCGS |
Model Year Start: 2019 |
Model: RAV4 HV |
Prod Date Range: [02/2019 -
] |
Title: PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM (for HV Model with Parking Support Brake System): C1AE296; Ultrasonic Sensor (Front Left Center) Component Internal Failure; 2019 - 2024 MY RAV4 HV [02/2019 - ] |
DTC
|
C1AE296
|
Ultrasonic Sensor (Front Left Center) Component Internal Failure
|
DESCRIPTION
The front center ultrasonic sensor (FLC sensor) is installed on the front bumper. The clearance warning ECU assembly detects obstacles based on signals it receives from the front center ultrasonic sensor (FLC sensor). If an open circuit or other malfunction occurs in the front center ultrasonic sensor (FLC sensor), the front center ultrasonic sensor (FLC sensor) does not operate correctly.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
C1AE296
|
Ultrasonic Sensor (Front Left Center) Component Internal Failure
|
Front center ultrasonic sensor (FLC sensor) failure
|
-
Front center ultrasonic sensor (FLC sensor)
-
Clearance warning ECU assembly
|
CAUTION / NOTICE / HINT
NOTICE:
-
Perform registration after replacing or removing and installing the ultrasonic sensor or clearance warning ECU assembly.
Click here
-
If a DTC is detected again after the repair, turn the power switch on (IG) and turn the intuitive parking assist system on, and then clear the DTC.
Click here
PROCEDURE
(a) Check for DTCs.
Click here
Body Electrical > Clearance Warning > Trouble Codes
(b) Clear the DTCs.
Click here
Body Electrical > Clearance Warning > Clear DTCs
(c) Recheck for DTCs.
Click here
Body Electrical > Clearance Warning > Trouble Codes
Result
|
Proceed to
|
DTCs is not output
|
A
|
Only DTC C1AE296 is output
|
B
|
DTC C1AE296 and C1AE287 are output
|
C
|
B
|
|
|
2.
|
REPLACE FRONT CENTER ULTRASONIC SENSOR (FLC SENSOR)
|
(a) Replace the front center ultrasonic sensor (FLC sensor) with a known good one.
Click here
HINT:
All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.
NEXT
|
|
|
(a) Check for DTCs.
Click here
Body Electrical > Clearance Warning > Trouble Codes
(b) Clear the DTCs.
Click here
Body Electrical > Clearance Warning > Clear DTCs
(c) Recheck for DTCs.
Click here
Body Electrical > Clearance Warning > Trouble Codes
Result
|
Proceed to
|
DTC C1AE296 is not output
|
A
|
DTC C1AE296 is output
|
B
|
A |
|
END (FRONT CENTER ULTRASONIC SENSOR [FLC SENSOR] WAS DEFECTIVE)
|
|