PARK ASSIST / MONITORING: PARKING SUPPORT BRAKE SYSTEM (for HV Model): TERMINALS OF ECU; 2019 - 2020 MY RAV4 HV [02/2019

Last Modified: 01-30-2024	6.11:8.1.0	Doc ID: RM100000001HCHM
Model Year Start: 2019	Model: RAV4 HV	Prod Date Range: [02/2019 - 06/2020]
Title: PARK ASSIST / MONITORING: PARKING SUPPORT BRAKE SYSTEM (for HV Model): TERMINALS OF ECU; 2019 - 2020 MY RAV4 HV [02/2019 - 06/2020]

TERMINALS OF ECU

CLEARANCE WARNING ECU ASSEMBLY

for TMMC Made

for TMC Made

(a) Disconnect the G25*1 or H4*2 clearance warning ECU assembly connector.

*1: for TMMC Made
*2: for TMC Made

(b) Measure the voltage and resistance on the wire harness side connector according to the value(s) in the table below.

for TMMC Made:

Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
G25-1 (IG) - G25-28 (E)	B - W-B	IG power source signal	Power switch off	Below 1 V
G25-1 (IG) - G25-28 (E)	B - W-B	IG power source signal	Power switch on (IG)	11 to 14 V
G25-28 (E) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω

for TMC Made:

Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
H4-1 (IG) - H4-28 (E)	B - W-B	IG power source signal	Power switch off	Below 1 V
H4-1 (IG) - H4-28 (E)	B - W-B	IG power source signal	Power switch on (IG)	11 to 14 V
H4-28 (E) - Body ground	W-B - Body ground	Ground	Always	Below 1 Ω

*1: for TMMC Made
*2: for TMC Made

(d) Measure the voltage, resistance and check for pulses according to the value(s) in the table below.

for TMMC Made:

Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
G25-2 (BOF) - G25-28 (E)	R - W-B	Power source for front sensor circuit	Power switch on (IG) Parking support brake system on	11 to 14 V
G25-3 (SOF) - G25-28 (E)	L - W-B	Front sensor communication signal (Front clearance sonar sensor)	Power switch on (IG) Parking support brake system on Shift lever in any position other than P Vehicle speed is less than approximately 10 km/h (6 mph)	Pulse generation (Refer to waveform 1)
G25-4 (E5) - G25-28 (E)	W - W-B	Ground for front clearance sonar	Always	Below 1 Ω
G25-9 (CBZ) - G25-8 (EF)	LG - L	No. 1 clearance warning buzzer signal	Buzzer sounding	Pulse generation (Refer to waveform 2)
G25-19 (BOR) - G25-28 (E)	LG - W-B	Power source for rear sensor circuit	Power switch on (IG) Parking support brake system on	11 to 14 V
G25-20 (SOR) - G25-28 (E)	SB - W-B	Rear sensor communication signal (Rear clearance sonar sensor)	Power switch on (IG) Parking support brake system on Shift lever in R	Pulse generation (Refer to waveform 3)
G25-21 (E1) - G25-28 (E)	GR - W-B	Ground for rear clearance sonar	Always	Below 1 Ω
G25-25 (BBZ) - G25-26 (ER)	LG - L	No. 2 clearance warning buzzer signal	Buzzer sounding	Pulse generation (Refer to waveform 2)

for TMC Made:

Terminal No. (Symbol)	Wiring Color	Terminal Description	Condition	Specified Condition
H4-2 (BOF) - H4-28 (E)	R - W-B	Power source for front sensor circuit	Power switch on (IG) Parking support brake system on	11 to 14 V
H4-3 (SOF) - H4-28 (E)	L - W-B	Front sensor communication signal (Front clearance sonar sensor)	Power switch on (IG) Parking support brake system on Shift lever in any position other than P Vehicle speed is less than approximately 10 km/h (6 mph)	Pulse generation (Refer to waveform 1)
H4-4 (E5) - H4-28 (E)	W - W-B	Ground for front clearance sonar	Always	Below 1 Ω
H4-9 (CBZ) - H4-8 (EF)	LG - L	No. 1 clearance warning buzzer signal	Buzzer sounding	Pulse generation (Refer to waveform 2)
H4-19 (BOR) - H4-28 (E)	LG - W-B	Power source for rear sensor circuit	Power switch on (IG) Parking support brake system on	11 to 14 V
H4-20 (SOR) - H4-28 (E)	SB - W-B	Rear sensor communication signal (Rear clearance sonar sensor)	Power switch on (IG) Parking support brake system on Shift lever in R	Pulse generation (Refer to waveform 3)
H4-21 (E1) - H4-28 (E)	GR - W-B	Ground for rear clearance sonar	Always	Below 1 Ω
H4-25 (BBZ) - H4-26 (ER)	LG - L	No. 2 clearance warning buzzer signal	Buzzer sounding	Pulse generation (Refer to waveform 2)

(e) Using an oscilloscope, check waveform 1.

(1) Waveform 1 (Reference)

Item

Content

Measurement terminal

G25-3 (SOF) - G25-28 (E)*1

H4-3 (SOF) - H4-28 (E)*2

Measurement setting

5 V/DIV., 1 ms./DIV.

Condition

Power switch on (IG)
Parking support brake system on
Shift lever in any position other than P
Vehicle speed is less than approximately 10 km/h (6 mph)

*1: for TMMC Made
*2: for TMC Made

(f) Using an oscilloscope, check waveform 2.

(1) Waveform 2 (Reference)

Item

Content

Measurement terminal

G25-9 (CBZ) - G25-8 (EF)*1

H4-9 (CBZ) - H4-8 (EF)*2

G25-25 (BBZ) - G25-26 (ER)*1

H4-25 (BBZ) - H4-26 (ER)*2

Measurement setting

2 V/DIV., 500 μs./DIV.

Condition

Buzzer sounding

*1: for TMMC Made
*2: for TMC Made

HINT:

The amplitude of the waveform changes according to the set volume.

(g) Using an oscilloscope, check waveform 3.

(1) Waveform 3 (Reference)

Item

Content

Measurement terminal

G25-20 (SOR) - G25-28 (E)*1

H4-20 (SOR) - H4-28 (E)*2

Measurement setting

5 V/DIV., 1 ms./DIV.

Condition

Power switch on (IG)
Parking support brake system on
Shift lever in R

*1: for TMMC Made
*2: for TMC Made

HYBRID VEHICLE CONTROL ECU ASSEMBLY

Click here

COMBINATION METER ASSEMBLY

Click here

BLIND SPOT MONITOR SENSOR RH (A)

Click here

BLIND SPOT MONITOR SENSOR LH (B)

Click here