Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001HG9O |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [02/2019 - 12/2021] |
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): Brake Control Warning Light Remains ON; 2019 - 2021 MY RAV4 RAV4 HV [02/2019 - 12/2021] |
Brake Control Warning Light Remains ON
|
DESCRIPTION
The skid control ECU (brake booster with master cylinder assembly) is connected to the combination meter assembly via CAN communication.
If the skid control ECU stores a DTC, the brake warning light / yellow (minor malfunction) comes on in the combination meter assembly.
CAUTION / NOTICE / HINT
NOTICE:
When replacing the skid control ECU (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve.
Click here
PROCEDURE
1.
|
READ VALUE USING TECHSTREAM (BRAKE WARNING LIGHT / YELLOW (MINOR MALFUNCTION))
|
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Select the Data List on the Techstream.
Click here
Chassis > ABS/VSC/TRAC > Data List
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
ECB Warning Light
|
Brake warning light / yellow (minor malfunction)
|
ON or OFF
|
ON: Warning light on
OFF: Warning light off
|
ECB: Electronically Controlled Brake System
|
Chassis > ABS/VSC/TRAC > Data List
Tester Display
|
ECB Warning Light
|
(d) Check the Techstream display condition of the brake warning light / yellow (minor malfunction).
Result
|
Proceed to
|
Display of the Data List remains OFF.
|
A
|
Display of the Data List remains ON.
|
B
|
|