Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001HHAH |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [02/2019 -
] |
Title: DOOR LOCK: KEY REMINDER WARNING SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2019 - 2024 MY RAV4 RAV4 HV [02/2019 - ] |
HOW TO PROCEED WITH TROUBLESHOOTING
|
CAUTION / NOTICE / HINT
HINT:
-
Use the following procedure to troubleshoot the key reminder warning system.
-
*: Use the Techstream.
PROCEDURE
1.
|
VEHICLE BROUGHT TO WORKSHOP
|
NEXT
|
|
|
2.
|
CUSTOMER PROBLEM ANALYSIS CHECK
|
HINT:
-
In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
-
Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
-
The following 5 items are important points for problem analysis:
What
|
Vehicle model, system name
|
When
|
Date, time, occurrence frequency, whether the problem occurred recently or has been occurring for a long time
|
Where
|
Whether the problem occurs at a specific location
|
Under what conditions?
|
Whether the doors were locked or unlocked, whether the ignition switch was ON, whether the engine has started
|
How did it happen?
|
Problem symptoms
|
NEXT
|
|
|
3.
|
INSPECT AUXILIARY BATTERY VOLTAGE
|
(a) Measure the auxiliary battery voltage.
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.
NEXT
|
|
|
4.
|
INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
|
(a) Using the Techstream, check for CAN communication system DTCs.
Click here
CAN DTCs are not output
|
|
|
5.
|
PROBLEM SYMPTOMS TABLE
|
(a) Refer to Problem Symptoms Table.
Click here
Fault is listed in Problem Symptoms Table |
|
ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE
|
Fault is not listed in Problem Symptoms Table
|
|
|
6.
|
OVERALL ANALYSIS AND TROUBLESHOOTING*
|
(a) Terminals of ECU
Click here
(b) Data List / Active Test
Click here
(c) Operation Check
Click here
NEXT
|
|
|
NEXT
|
|
|
NEXT |
|
END
|
|