| Last Modified: 05-08-2025 | 6.11:8.1.0 | Doc ID: RM100000001HJEV |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [02/2019 - ] |
| Title: REAR SUSPENSION: REAR UPPER ARM: INSTALLATION; 2019 - 2025 MY RAV4 RAV4 HV [02/2019 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL REAR UPPER CONTROL ARM ASSEMBLY LH
|
(a) Temporarily install the rear upper control arm assembly LH to the rear suspension member sub-assembly with the bolt and nut. NOTICE:
|
|
(b) Position the rear upper control arm assembly LH as shown in the illustration.
Reference Length (A):
1.2 mm (0.0472 in.)
(c) Fully tighten the bolt.
Torque:
73 N·m {744 kgf·cm, 54 ft·lbf}
NOTICE:
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.
2. INSTALL REAR UPPER CONTROL ARM ASSEMBLY RH
HINT:
Perform the same procedure as for the LH side.
3. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY
-
for 2WD:
Click here
![2019 - 2020 MY RAV4 RAV4 HV [02/2019 - 08/2020]; REAR SUSPENSION: REAR SUSPENSION MEMBER (for 2WD): INSTALLATION](/t3Portal/stylegraphics/info.gif)
-
for HV Model AWD:
Click here
-
for Gasoline Model AWD:
Click here
|
|