- The manual (SOS) switch red indicator illuminates
-
Replace mobilephone battery
![2020 - 2024 MY RAV4 RAV4 HV [10/2019 - ]; CELLULAR COMMUNICATION: MAYDAY BATTERY: REMOVAL](/t3Portal/stylegraphics/info.gif)
NOTICE:
-
After replacing the mobilephone battery, perform initialization.
- After performing work, perform "CLEAR VEHICLE CONTROL HISTORY" to turn off the manual (SOS) switch red indicator.
-
After replacing the mobilephone battery, perform initialization.
| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001K2SR |
| Model Year Start: 2020 | Model: RAV4 | Prod Date Range: [10/2019 - 10/2022] |
| Title: CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: VEHICLE CONTROL HISTORY; 2020 - 2022 MY RAV4 RAV4 HV [10/2019 - 10/2022] | ||
VEHICLE CONTROL HISTORY
NOTICE:
Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again.
CHECK VEHICLE CONTROL HISTORY
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Telematics / Utility / Vehicle Control History (RoB).
Body Electrical > Telematics > Utility
|
Tester Display |
|---|
|
Vehicle Control History (RoB) |
Vehicle Control History Item
|
Code |
Tester Display |
Description |
Diagnostic Note |
|---|---|---|---|
|
X2210 |
Life Cycle of DCM Backup Battery |
When the system detects that the mobilephone battery has reached the end of its lifespan. |
|
|
X2211 |
Low DCM Backup Battery Charge |
When the mobilephone battery charge is low. |
- |
|
X2601 |
Software Inconsistency with ENG/HV Control Module |
The VIN number received via CAN communication does not match that stored in the DCM (telephone transceiver assembly). |
|
|
X2213 |
Emergency Call Switch Stuck On |
The manual (SOS) switch is on for 5 minutes or more |
|
|
X2214 |
Communication Blackout from Power Distribution Controller ECU |
Lost Communication with ECM |
Check CAN Communication System for HV Model: Click here
for Gasoline Model: Click here
|
|
X2212 |
Diagnostics Communication Flow Failure |
Diagnostics communication flow failure (ID, Mode/SID difference). |
- |
|
X2215 |
Non Approval of the Reprograming |
User did not approve software update. |
- |
|
X2216 |
Failure of the Reprogramming |
Software writing failed. |
- |
|
X2217 |
Inconsistent Startup Software |
Software writing succeeded, but started software does not match package. |
- |
CLEAR VEHICLE CONTROL HISTORY
NOTICE:
By performing this procedure, all stored Vehicle Control History will be cleared.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Telematics / Utility / Vehicle Control History (RoB).
Body Electrical > Telematics > Utility
|
Tester Display |
|---|
|
Vehicle Control History (RoB) |
(e) According to the display on the Techstream, clear the Vehicle Control History (RoB).
|
|