Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001KGAU
Model Year Start: 2020 Model: RAV4 Prod Date Range: [10/2019 - 10/2022]
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Data Signal Circuit between Radio Receiver and Stereo Jack Adapter; 2020 - 2022 MY RAV4 RAV4 HV [10/2019 - 10/2022]

Data Signal Circuit between Radio Receiver and Stereo Jack Adapter

DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the radio and display receiver assembly via this circuit.

WIRING DIAGRAM

PROCEDURE

1.

CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)

(a) Disconnect the G106 radio and display receiver assembly connector.

(b) Disconnect the G132 No. 1 stereo jack adapter assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

G106-2 (US1-) - G132-2 (UDO-)

Always

Below 1 Ω

G106-3 (US1+) - G132-3 (UDO+)

Always

Below 1 Ω

G106-5 (USG1) - G132-5 (UJSS)

Always

Below 1 Ω

G106-2 (US1-) - Body ground

Always

10 kΩ or higher

G106-3 (US1+) - Body ground

Always

10 kΩ or higher

G106-5 (USG1) - Body ground

Always

10 kΩ or higher

*a

Front view of wire harness connector

(to Radio and Display Receiver Assembly)

*b

Front view of wire harness connector

(to No. 1 Stereo Jack Adapter Assembly)
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR