| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001OE5X |
| Model Year Start: 2020 | Model: RAV4 HV | Prod Date Range: [06/2020 - ] |
| Title: HYBRID / BATTERY CONTROL: BATTERY ECU (for LITHIUM-ION BATTERY): INSTALLATION; 2020 - 2024 MY RAV4 HV [06/2020 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL BATTERY ECU ASSEMBLY
CAUTION:
Be sure to wear insulated gloves and protective goggles.
(a) Install the battery ECU assembly to the HV battery with the 3 nuts.
Torque:
7.5 N·m {76 kgf·cm, 66 in·lbf}
NOTICE:
-
Check color of the label.
*a
Black Label
- If the battery ECU assembly has been struck or dropped, replace it.
|
(b) Connect the 3 battery ECU assembly connectors and move the lock lever to lock them. NOTICE: Make sure that the connectors are connected securely. |
|
(c) Engage the clamp.
2. INSTALL NO. 1 HV BATTERY HOSE
CAUTION:
Be sure to wear insulated gloves and protective goggles.
(a) Engage the 2 claws to install the No. 1 HV battery hose to the HV battery.
(b) Install the 2 clips.
3. INSTALL UPPER HV BATTERY COVER SUB-ASSEMBLY
CAUTION:
Be sure to wear insulated gloves and protective goggles.
(a) Install the upper HV battery cover sub-assembly to the HV battery with the 5 bolts and 6 nuts.
Torque:
7.5 N·m {76 kgf·cm, 66 in·lbf}
4. CONNECT FLOOR WIRE
Click here
![2020 - 2024 MY RAV4 HV [06/2020 - ]; HYBRID / BATTERY CONTROL: HV BATTERY (for LITHIUM-ION BATTERY): INSTALLATION+](/t3Portal/stylegraphics/info.gif)
5. INSTALL NO. 4 HV BATTERY PROTECTOR
Click here
6. CONNECT FLOOR WIRE
Click here
7. INSTALL HYBRID BATTERY HOSE ASSEMBLY
Click here
8. INSTALL NO. 1 HV BATTERY COVER PANEL RH
Click here
9. INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY
Click here
10. INSTALL BATTERY SERVICE COVER BOARD
Click here
11. INSTALL NO. 2 BATTERY SERVICE COVER BOARD
Click here
12. INSTALL REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedure as for the LH side.
Click here
13. INSTALL NO. 3 BATTERY SERVICE COVER BOARD
Click here
14. INSTALL REAR DOOR SCUFF PLATE LH
Click here
15. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY
Click here
16. INSTALL REAR SEAT CUSHION LOCK HOOK
Click here
17. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
Click here
18. INSTALL SERVICE PLUG GRIP
Click here
19. PERFORM INITIALIZATION
Click here
|
|