- Spark plug
- Ignition coil assembly
| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001QOU3 |
| Model Year Start: 2021 | Model: RAV4 HV | Prod Date Range: [08/2020 - ] |
| Title: A25A-FXS (ENGINE CONTROL): IGNITION COIL AND SPARK PLUG: REMOVAL; 2021 - 2024 MY RAV4 HV [08/2020 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during ignition coil assembly or spark plug removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
|
Inspection after repair |
|
|
NOTICE:
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
![2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
Click here
2. REMOVE IGNITION COIL ASSEMBLY
|
(a) Disconnect the 4 ignition coil assembly connectors. |
|
(b) Remove the 4 bolts and 4 ignition coil assemblies from the cylinder head cover sub-assembly.
NOTICE:
If a ignition coil assembly has been struck or dropped, replace it.
3. REMOVE SPARK PLUG
Click here
|
|