Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001QOU8
Model Year Start: 2021 Model: RAV4 HV Prod Date Range: [08/2020 -           ]
Title: A25A-FXS (ENGINE CONTROL): KNOCK SENSOR: INSTALLATION; 2021 - 2024 MY RAV4 HV [08/2020 -        ]

INSTALLATION

CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION

HINT:

Perform "Inspection After Repair" after replacing the knock control sensor.

Click here 2021 MY RAV4 RAV4 HV [08/2020 - 12/2021]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2022 - 2024 MY RAV4 RAV4 HV [12/2021 -        ]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION

PROCEDURE

1. INSTALL KNOCK CONTROL SENSOR

HINT:

Perform "Inspection After Repair" after replacing the knock control sensor.

Click here 2021 MY RAV4 RAV4 HV [08/2020 - 12/2021]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION 2022 - 2024 MY RAV4 RAV4 HV [12/2021 -        ]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION

(a) Install the knock control sensor to the cylinder block sub-assembly with the bolt so that the knock control sensor installation position is as shown in the illustration.

Torque:

20 N·m {204 kgf·cm, 15 ft·lbf}

NOTICE:

  • If the knock control sensor has been struck or dropped, replace it.
  • Make sure that the knock control sensor is in the correct position.

*a

Top

*b

Right of Vehicle

*c

15°

*d

(b) Connect the knock control sensor connector.

2. INSTALL INTAKE MANIFOLD

Click here 2019 - 2024 MY RAV4 HV [11/2018 -        ]; A25A-FXS (INTAKE / EXHAUST): INTAKE MANIFOLD: INSTALLATION