| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001QZ2B |
| Model Year Start: 2021 | Model: RAV4 | Prod Date Range: [08/2020 - 10/2022] |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Voice Guidance does not Function; 2021 - 2022 MY RAV4 RAV4 HV [08/2020 - 10/2022] | ||
|
Voice Guidance does not Function |
WIRING DIAGRAM
PROCEDURE
|
1. |
CHECK VOICE GUIDANCE SETTING |
(a) Check that the voice guidance setting is not off.
OK:
Voice guidance setting is not off.
| NG |
|
CHANGE VOICE GUIDANCE SETTING TO ON |
|
|
2. |
CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NAVIGATION ECU) |
(a) Disconnect the G1 radio and display receiver assembly connector.
(b) Disconnect the G15 navigation ECU connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
G1-22 (SI+) - G15-6 (VOI+) |
Always |
Below 1 Ω |
|
G1-23 (SI-) - G15-7 (VOI-) |
Always |
Below 1 Ω |
|
G1-22 (SI+) - Body ground |
Always |
10 kΩ or higher |
|
G1-23 (SI-) - Body ground |
Always |
10 kΩ or higher |
|
G15-8 (SLD1) - Body ground |
Always |
10 kΩ or higher |
| OK |
|
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|