Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001R7VL |
Model Year Start: 2020 |
Model: RAV4 |
Prod Date Range: [10/2019 -
] |
Title: SLIDING ROOF / CONVERTIBLE: SLIDING ROOF SWITCH ASSEMBLY: INSPECTION; 2020 - 2024 MY RAV4 RAV4 HV [10/2019 - ] |
INSPECTION
PROCEDURE
1. INSPECT MAP LIGHT SUB-ASSEMBLY (for Panoramic Moon Roof)
(a) for TMC Made:
(1) Check the sliding roof switch (map light sub-assembly).
-
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
13 (GND) - 17 (OPN)
|
OPEN switch ON
|
100 Ω or less
|
OPEN switch OFF
|
1 MΩ or higher
|
13 (GND) - 16 (CLS)
|
CLOSE switch ON
|
100 Ω or less
|
CLOSE switch OFF
|
1 MΩ or higher
|
13 (GND) - 19 (UP)
|
Roof sunshade OPEN switch ON
|
100 Ω or less
|
Roof sunshade OPEN switch OFF
|
1 MΩ or higher
|
13 (GND) - 18 (DOWN)
|
Roof sunshade CLOSE switch ON
|
100 Ω or less
|
Roof sunshade CLOSE switch OFF
|
1 MΩ or higher
|
13 (GND) - 20 (B)
|
Tilt switch ON
|
100 Ω or less
|
Tilt switch OFF
|
1 MΩ or higher
|
If the result is not as specified, replace the sliding roof switch (map light sub-assembly).
*a
|
Component without harness connected
(Sliding Roof Switch (Map Light Sub-assembly))
|
(b) Except TMC Made:
(1) Check the sliding roof switch (map light sub-assembly).
-
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
11 (GND) - 14 (OPN)
|
OPEN switch ON
|
100 Ω or less
|
OPEN switch OFF
|
1 MΩ or higher
|
11 (GND) - 13 (CLS)
|
CLOSE switch ON
|
100 Ω or less
|
CLOSE switch OFF
|
1 MΩ or higher
|
11 (GND) - 17 (B)
|
Tilt switch ON
|
100 Ω or less
|
Tilt switch OFF
|
1 MΩ or higher
|
11 (GND) - 16 (UP)
|
Roof sunshade OPEN switch ON
|
100 Ω or less
|
Roof sunshade OPEN switch OFF
|
1 MΩ or higher
|
11 (GND) - 15 (DOWN)
|
Roof sunshade CLOSE switch ON
|
100 Ω or less
|
Roof sunshade CLOSE switch OFF
|
1 MΩ or higher
|
If the result is not as specified, replace the sliding roof switch (map light sub-assembly).
*a
|
Component without harness connected
(Sliding Roof Switch (Map Light Sub-assembly))
|
2. INSPECT MAP LIGHT SUB-ASSEMBLY (for Moon Roof)
(a) for TMC Made:
(1) Check the sliding roof switch (map light sub-assembly).
-
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
13 (GND) - 17 (OPN)
|
OPEN switch ON
|
100 Ω or less
|
OPEN switch OFF
|
1 MΩ or higher
|
13 (GND) - 16 (CLS)
|
CLOSE switch ON
|
100 Ω or less
|
CLOSE switch OFF
|
1 MΩ or higher
|
13 (GND) - 19 (UP)
|
UP switch ON
|
100 Ω or less
|
UP switch OFF
|
1 MΩ or higher
|
13 (GND) - 18 (DOWN)
|
DOWN switch ON
|
100 Ω or less
|
DOWN switch OFF
|
1 MΩ or higher
|
If the result is not as specified, replace the sliding roof switch (map light sub-assembly).
|
|
*a
|
Component without harness connected
(Sliding Roof Switch (Map Light Sub-assembly))
|
|
|
(b) Except TMC Made:
(1) Check the sliding roof switch (map light sub-assembly).
-
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
7 (OPN) - 20 (GND)
|
OPEN switch ON
|
100 Ω or less
|
OPEN switch OFF
|
1 MΩ or higher
|
8 (CLS) - 20 (GND)
|
CLOSE switch ON
|
100 Ω or less
|
CLOSE switch OFF
|
1 MΩ or higher
|
16 (UP) - 20 (GND)
|
UP switch ON
|
100 Ω or less
|
UP switch OFF
|
1 MΩ or higher
|
17 (DOWN) - 20 (GND)
|
DOWN switch ON
|
100 Ω or less
|
DOWN switch OFF
|
1 MΩ or higher
|
If the result is not as specified, replace the sliding roof switch (map light sub-assembly).
|
|
*a
|
Component without harness connected
(Sliding Roof Switch (Map Light Sub-assembly))
|
|
|
|