Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM10000000201FM
Model Year Start: 2022 Model: RAV4 Prod Date Range: [12/2021 -           ]
Title: WINDOW / GLASS: POWER WINDOW SWITCH (for Rear Door): INSPECTION; 2022 - 2024 MY RAV4 RAV4 HV [12/2021 -        ]

INSPECTION

CAUTION / NOTICE / HINT

HINT:

Use the same procedure for the RH and LH sides.

PROCEDURE

1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY

(a) Inspect the rear power window regulator switch assembly.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

5 (UP) - 7 (GND)

UP(MANUAL) → OFF

Below 1 Ω → 10 kΩ or higher

4 (DOWN) - 7 (GND)

DOWN(MANUAL) → OFF

Below 1 Ω → 10 kΩ or higher

5 (UP) - 7 (GND)

5 (UP) - 8 (AUTO)

UP(AUTO) → OFF

Below 1 Ω → 10 kΩ or higher

4 (DOWN) - 7 (GND)

8 (AUTO) - 7 (GND)

DOWN(AUTO) → OFF

Below 1 Ω → 10 kΩ or higher

If the result is not as specified, replace the rear power window regulator switch assembly.

*a

Component without harness connected

(Rear Power Window Regulator Switch Assembly)

(b) w/ illumination:

Check that the LED illumination.

(1) Apply auxiliary battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

OK:

Auxiliary Battery Connection

Specified Condition

Auxiliary battery positive (+) → 3 (ILL+)

Auxiliary battery negative (-) → 1 (ILL-)

LED illuminates

If the result is not as specified, replace the rear power window regulator switch assembly.

*a

Component without harness connected

(Rear Power Window Regulator Switch Assembly)