UTILITY

Recognition Camera/Target Position Memory

HINT:

Recognition Camera/Target Position Memory is used to enter required information into the forward recognition camera.

(a) Perform Recognition Camera/Target Position Memory according to the display on the Techstream.

Chassis > Front Recognition Camera > Utility

HINT:

For forward recognition camera adjustment procedures.

Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.

One Time Recognition: Click here

Sequential Recognition: Click here

Driving Adjustment: Click here

HINT:

Recognition Camera Axis Adjust is used to calibrate the internal data of the forward recognition camera to enhance its recognition accuracy.

Recognition Camera Axis Adjust

(a) Perform Recognition Camera Axis Adjust according to the display on the Techstream.

Chassis > Front Recognition Camera > Utility

HINT:

For forward recognition camera adjustment procedures.

Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.

One Time Recognition: Click here

Sequential Recognition: Click here

Driving Adjustment: Click here

Initial Axis Adjust Value Display

HINT:

This utility is used to display the initial axis adjust value display stored in the forward recognition camera.

(a) Following the instructions on the Techstream, perform "Initial Axis Adjust Value Display".

Chassis > Front Recognition Camera > Utility

Front Recognition Camera Axis Misalignment Reading

HINT:

This utility is used to check the front recognition camera axis misalignment reading calculated by the forward recognition camera.

(a) Following the instructions on the Techstream, perform "Front Recognition Camera Axis Misalignment Reading".

Chassis > Front Recognition Camera > Utility

Transition to Online Axis Alignment Mode

NOTICE:

This utility transitions to online axis alignment mode of the forward recognition camera.

(a) Following the instructions on the Techstream, perform "Transition to Online Axis Alignment Mode".

Chassis > Front Recognition Camera > Utility

PCS Image Information Clear

HINT:

PCS Image Information Clear is used to clear the PCS Image Information data.

(a) Perform PCS Image Information Clear according to the display on the Techstream.

Chassis > Front Recognition Camera > Utility

PCS Image Record Setting

HINT:

PCS Image Record Setting is used to activate/deactivate the PCS image recording function.

(a) Perform PCS Image Record Setting according to the display on the Techstream.

Chassis > Front Recognition Camera > Utility