REMOVAL

PROCEDURE

1. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

Click here

2. REMOVE REAR SEAT CUSHION LOCK HOOK

Click here

3. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (FLOOR ANCHOR)

Click here

4. REMOVE REAR SEATBACK ASSEMBLY RH

Click here

5. REMOVE REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.

Click here

6. REMOVE NO. 2 BATTERY SERVICE COVER BOARD (for HV Model)

Click here

7. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

Click here

8. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

Click here

9. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

10. REMOVE REAR SEAT SIDE GARNISH RH

HINT:

Use the same procedure described for the LH side.

Click here

11. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

Click here

12. REMOVE DECK BOARD ASSEMBLY

Click here

13. REMOVE REAR NO. 2 FLOOR BOARD

Click here

14. REMOVE REAR FLOOR FINISH PLATE

Click here

15. REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

Click here

16. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

Click here

17. REMOVE TETHER ANCHOR BRACKET SET

Click here

18. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

Click here

19. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET

(a) Disconnect the 2 connectors.

	Connector
	Bolt

(b) Remove the 3 bolts.

(c) Detach the guide and remove the stereo component amplifier assembly with bracket.

20. REMOVE NO. 1 AMPLIFIER BRACKET

(a) Remove the 2 screws and No. 1 amplifier bracket.

21. REMOVE NO. 2 AMPLIFIER BRACKET

(a) Remove the 2 screws and No. 2 amplifier bracket.

22. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY