X20B0

Circumference Monitoring Camera Control Module Malfunction

Radio and display receiver assembly is storing history from when a panoramic view monitor system malfunction was received

Perform troubleshooting for the panoramic view monitor system.

HINT:

Stored when a panoramic view monitor system malfunction is received by the radio and display receiver assembly via CAN communication.

X20B1

Rear Camera Malfunction

Radio and display receiver assembly is storing history from when a back guide monitor malfunction was received

Perform troubleshooting for the back guide monitor system.

HINT:

Stored when a back guide monitor malfunction notification is received by the radio and display receiver assembly via CAN communication.

X3FF0

Over The Air Activation Start

Radio and display receiver assembly is storing history from when CAN microcomputer OTA started

-

X3FF1

Over The Air Activation Stop

Radio and display receiver assembly is storing history from when CAN microcomputer OTA ended

-

X8020

Video/Sound Signal Malfunction

Radio and display receiver assembly is storing history from when an auxiliary battery low voltage (6.75 V or less) was detected

HINT:

When the auxiliary battery voltage becomes low (5.0 to 6.8 V), images are blacked out and audio is muted.

X8021

Touch Switch Stuck

Radio and display receiver assembly is storing history from when a stuck touch switch was detected

X8022

Initialization History

Radio and display receiver assembly is storing history from when an intended initialization operation was detected

HINT:

Explain to the customer that the radio and display receiver assembly stores a history of an intended initialization operation using the multi-display.

X8023

Navi Kit Use History

Radio and display receiver assembly is storing history from when the vehicle speed signal was off, the parking brake signal was on and DTC B228231 was detected

HINT:

For the detection conditions of DTC B228231, refer to

X8024

Position Corrected History

Radio and display receiver assembly is storing history from when the location calibration was 50 m or more

Refer to problem symptoms table (Vehicle position mark deviates from correct position and does not return to correct position)

X8030

Soft Update (USB Reading Error)

Radio and display receiver assembly is storing history from when a USB memory error was detected

HINT:

Explain to the customer that any of the following could be the cause:

X8031

Soft Update (Encryption Release Error)

Radio and display receiver assembly is storing history from when a program update error was detected

HINT:

Explain to the customer that any of the following could be the cause:

X8032

Soft Update (Program of Different Model)

History of detection of update program error stored by the radio and display receiver assembly

HINT:

Explain to the customer that the update program was judged to be for a different device.

X8033

USB Memory Malfunction (The File System Error)

Radio and display receiver assembly is storing history from when a non-compatible file or malfunctioning USB storage device was connected to the stereo jack adapter assembly

Connect a USB storage device with valid files.

HINT:

Explain to the customer that any of the following could be the cause:

X8034

USB Memory Malfunction (With No Playable File)

Radio and display receiver assembly is storing history from when no playable files on a USB storage device connected to the stereo jack adapter assembly was detected

Connect a USB storage device that has playable files.

HINT:

Explain to the customer that there were no playable files on the USB storage device.

X8038

iPod Malfunction

Radio and display receiver assembly is storing history from when a malfunctioning iPod was connected to the stereo jack adapter assembly

X8039

iPod Malfunction (With Control Software)

Radio and display receiver assembly is storing history from when there was a malfunction of the control software of an iPod connected to the stereo jack adapter assembly

X803A

iPod Malfunction (With Communication Error)

Radio and display receiver assembly is storing history from when a communication error with an iPod connected to the stereo jack adapter assembly was detected

X803B

iPod Malfunction (With No Playable File)

Radio and display receiver assembly is storing history from when no playable files on an iPod connected to the stereo jack adapter assembly was detected

Connect an iPod that has playable files.

X803C

SD Card Communication Malfunction

Radio and display receiver assembly is storing history from when an SD card malfunction was detected

If the malfunction continues to recur, replace the radio and display receiver assembly.

HINT:

Explain to the customer that an internal SD malfunction has been detected by the radio and display receiver assembly.

X8080

AMP Malfunction (Temperature High)

Stereo component amplifier assembly is storing history from when it was detected that the stereo component amplifier assembly temperature was above a certain value (approximately 150°C)

HINT:

The stereo component amplifier assembly will return to normal when the temperature drops below a certain value (approximately 150°C or less).

X8081

AMP Malfunction (High Output Sound Source)

Stereo component amplifier assembly is storing history from when high output sound source similar to direct current was continuously detected (low frequency or square wave continued)

HINT:

Explain to the customer that a high output sound source similar to direct current (low frequency or square wave continued to be output) was detected.

X8082

AMP Malfunction (Short Circuit)

Stereo component amplifier assembly is storing history from when a direct current load on a speaker output circuit was detected

HINT:

Refer to DTC B15C371.

X8087

AMP Malfunction (ANC Communication Error)

Stereo component amplifier assembly is storing history from when an ANC ECU (stereo component equalizer assembly) communication malfunction was detected