| 
                           Last Modified: 05-08-2025 | 
                        6.11:8.1.0  | 
                        
                           Doc ID: RM1000000026OM3 | 
                      
                     
                        | 
                           Model Year Start: 2023 | 
                        
                           Model: RAV4 | 
                        
                           Prod Date Range: [10/2022 -                    
                                       ] | 
                      
                     
                        | 
                           Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Wi-Fi Connection History; 2023 - 2025 MY RAV4 RAV4 HV [10/2022 -        ] | 
                      
                   
                  
                   
                  CAUTION / NOTICE / HINT
                  NOTICE: 
                  Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. 
                  Click here
                        
                           
                               
                           
                        
                     
                   
                   
                  PROCEDURE
                   
                  
                     
                        
                           | 
                               1.  
                            | 
                           
                               CHECK "Wi-Fi" SETTINGS 
                            | 
                         
                     
                   
                  (a) Check that the following Wi-Fi connection settings are set as follows: 
                  "Wi-Fi" is set to on. 
                  
                     
                        
                           | NG | 
                           
                               
                            | 
                           
                               PERFORM WI-FI SETTING AGAIN 
                            | 
                         
                     
                   
                  
                     
                        
                           
                              
                                 | 
OK
 | 
                               
                              
                                 
                                     
                                  | 
                               
                            
                         | 
                      
                   
                   
                  
                     
                        
                           | 
                               2.  
                            | 
                           
                               CHECK CONDITIONS AND PROCEDURE 
                            | 
                         
                     
                   
                  (a) Check the conditions and procedure for establishing a "Wi-Fi" connection, and perform the "Wi-Fi" connection procedure again. 
                  
                     HINT: 
                     
                        - 
As there may be wave interference, disconnect other "Wi-Fi" compatible devices or "Bluetooth" compatible devices before establishing a "Wi-Fi" connection.
 
                        - 
A "Wi-Fi" connection can be established manually or automatically.
 
                        - 
There are 2 ways to establish a manual "Wi-Fi" connection. Connecting by searching for a "Wi-Fi" access point, and connecting by entering an SSID and password.
 
                        - 
Even though an automatic connection is enabled, a connection can be established only when a "Wi-Fi" access point with the same SSID and password that were used for a previous connection exists.
 
                      
                   
                  
                     
                        
                           | 
                               Result 
                            | 
                           
                               Proceed to 
                            | 
                         
                     
                     
                        
                           | 
                               "Wi-Fi" connection can be established. 
                            | 
                           
                               A 
                            | 
                         
                        
                           | 
                               "Wi-Fi" connection cannot be established. 
                            | 
                           
                               B 
                            | 
                         
                     
                   
                  
                     
                        
                           | A | 
                           
                               
                            | 
                           
                               END 
                            | 
                         
                     
                   
                  
                     
                        
                           
                              
                                 | 
B
 | 
                               
                              
                                 
                                     
                                  | 
                               
                            
                         | 
                      
                   
                   
                  
                     
                        
                           | 
                               3.  
                            | 
                           
                               CHECK DEVICE TO BE CONNECTED VIA "Wi-Fi" 
                            | 
                         
                     
                   
                  (a) Check the device to be connected via "Wi-Fi". 
                  HINT: 
                  Considering the radio wave environment around the vehicle, move the vehicle and establish a "Wi-Fi" connection. 
                  
                     
                        
                           | 
                               Result 
                            | 
                           
                               Proceed to 
                            | 
                         
                     
                     
                        
                           | 
                               The in-vehicle device is trying to connect to the "Wi-Fi" access point of a portable device such as a mobile "Wi-Fi" router, tethering device, etc. 
                            | 
                           
                               A 
                            | 
                         
                        
                           | 
                               The in-vehicle device is trying to connect to a "Wi-Fi" access point other than a portable device. 
                            | 
                           
                               B 
                            | 
                         
                     
                   
                  
                  
                     
                        
                           
                              
                                 | 
A
 | 
                               
                              
                                 
                                     
                                  | 
                               
                            
                         | 
                      
                   
                   
                  
                  (a) Bring a portable device to be used to establish a "Wi-Fi" connection near the in-vehicle device, and perform "Wi-Fi" connection again. 
                  
                     HINT: 
                     
                        - 
Considering the radio wave environment around the vehicle, move the vehicle and establish a "Wi-Fi" connection.
 
                        - 
Depending on the type of the portable device, customer operation such as internet sharing, tethering settings, etc., may be required whenever establishing a "Wi-Fi" connection.
 
                      
                   
                  
                     
                        
                           | 
                               Result 
                            | 
                           
                               Proceed to 
                            | 
                         
                     
                     
                        
                           | 
                               "Wi-Fi" connection can be established. 
                            | 
                           
                               A 
                            | 
                         
                        
                           | 
                               "Wi-Fi" connection cannot be established. 
                            | 
                           
                               B 
                            | 
                         
                     
                   
                  
                     
                        
                           | A | 
                           
                               
                            | 
                           
                               END 
                            | 
                         
                     
                   
                  
                   
                  
                  (a) Move the vehicle to an access point where "Wi-Fi" connection can be established normally with other vehicles, and perform the "Wi-Fi" connection procedure again. 
                  
                     HINT: 
                     
                        - 
When the in-vehicle device is connected to an outside "Wi-Fi" access point, the "Wi-Fi" connection will be disconnected if leaving the radio wave service area.
 
                        - 
This function is not designed to be used while driving. Use this function only when the vehicle is stopped.
 
                      
                   
                  
                     
                        
                           | 
                               Result 
                            | 
                           
                               Proceed to 
                            | 
                         
                     
                     
                        
                           | 
                               "Wi-Fi" connection can be established. 
                            | 
                           
                               A 
                            | 
                         
                        
                           | 
                               "Wi-Fi" connection cannot be established. 
                            | 
                           
                               B 
                            | 
                         
                     
                   
                  
                     
                        
                           | A | 
                           
                               
                            | 
                           
                               END (ACCESS POINT WAS ABNORMAL) 
                            | 
                         
                     
                   
                  
                     
                        
                           
                              
                                 | 
B
 | 
                               
                              
                                 
                                     
                                  | 
                               
                            
                         | 
                      
                   
                   
                  
                     
                        
                           | 
                               6.  
                            | 
                           
                               CHECK "Wi-Fi" ACCESS POINT 
                            | 
                         
                     
                   
                  (a) Bring a well-known portable device such as a mobile "Wi-Fi" router, tethering device, etc., near the in-vehicle device, and perform the "Wi-Fi" connection procedure again. 
                  
                     HINT: 
                     
                        - 
Considering the radio wave environment around the vehicle, move the vehicle and establish a "Wi-Fi" connection.
 
                        - 
Depending on the type of the portable device, customer operation such as internet sharing, tethering settings, etc., may be required whenever establishing a "Wi-Fi" connection.
 
                      
                   
                  
                     
                        
                           | 
                               Result 
                            | 
                           
                               Proceed to 
                            | 
                         
                     
                     
                        
                           | 
                               "Wi-Fi" connection can be established. 
                            | 
                           
                               A 
                            | 
                         
                        
                           | 
                               "Wi-Fi" connection cannot be established. 
                            | 
                           
                               B 
                            | 
                         
                     
                   
                  
                     
                        
                           | A | 
                           
                               
                            | 
                           
                               END (ACCESS POINT WAS TEMPORARY ABNORMAL) 
                            | 
                         
                     
                   
                  
                   
                  
                     
                        
                           | 
                               7.  
                            | 
                           
                               CHECK RESULT OF "Wi-Fi Connection History" 
                            | 
                         
                     
                   
                  (a) Check the wave interference while a "Wi-Fi" connection is established. 
                  
                     HINT: 
                     
                        - 
Check the "W-Fi Connection History" around the time that the malfunction occurred.
 
                        - 
Using the GTS, proceed to the appropriate link in accordance with the result of "Wi-Fi Connection History".
Click here
                                 
                                    
                                        
                                    
                                 
                              
                            
                         
                      
                   
                  
                     
                        
                           | 
                               Result 
                            | 
                           
                               Proceed to 
                            | 
                         
                     
                     
                        
                           | 
                               "Received Signal Strength" is -71 dBm or less 
                            | 
                           
                               A 
                            | 
                         
                        
                           | 
                               "Data Rate" is "Slow Speed" 
                            | 
                         
                        
                           | 
                               "Packet Error Rate" is 5% or more 
                            | 
                         
                        
                           | 
                               "Result" is "Connection Failure (Authentication Failure)" 
                            | 
                           
                               B 
                            | 
                         
                        
                           | 
                               "Result" is "Connection Failure (Time Out)" 
                            | 
                           
                               C 
                            | 
                         
                        
                           | 
                               None of the above 
                            | 
                           
                               D 
                            | 
                         
                     
                   
                  
                     
                        
                           | A | 
                           
                               
                            | 
                           
                               ESTABLISH "WI-FI" CONNECTION IN AREA WITH LITTLE WAVE INTERFERENCE 
                            | 
                         
                     
                   
                  
                     
                        
                           | B | 
                           
                               
                            | 
                           
                               EXPLAIN TO CUSTOMER THAT THERE WAS POSSIBILITY THAT USED PASSWORD WAS NOT CORRECT 
                            | 
                         
                     
                   
                  
                     
                        
                           | C | 
                           
                               
                            | 
                           
                               CHECK POWER AND CHARGING STATE OF CONNECTED EXTERNAL DEVICE, AND RESTART IT AND PERFORM "WI-FI" CONNECTION PROCEDURE AGAIN 
                            | 
                         
                     
                   
                  
                  
                |