Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM1000000026S7K
Model Year Start: 2023 Model: RAV4 Prod Date Range: [10/2022 -           ]
Title: CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: DCM OPERATION HISTORY; 2023 - 2024 MY RAV4 RAV4 HV [10/2022 -        ]

DCM OPERATION HISTORY

HINT:

  • This function shows the telematics network status when the DCM (telematics transceiver) was operated. Use this when no DTC is present but this telematics system was unable to connect to the call center. This symptom may occur if cell phone signal strength is very weak.
  • This function is used to display operation history information and the time at which it was stored in the DCM (telematics transceiver).

DCM OPERATION HISTORY

(a) Enter the following menus:

Body Electrical > Telematics > Utility

Tester Display

DCM Operation History

(b) Choose "Items" on the DCM Operation History Menu.

HINT:

  • When "Operation Code" is recorded, DCM Operation History is displayed on the GTS.
  • The displayed "Function" differs depending on the selected "Items".

(c) Refer to the following chart and check the system operation status displayed on the GTS. (The following chart is an example of the system operation status.)

System Operation Status Example

Occurrence Time*1

Operation Code*2

Function*3

Content*4

Roaming*5

Voice Call*6

Service Area*7

Electric Level*8

2017/12/31 12:40:50

0101

GNSS (Satellite)

Unreceived GNSS (Satellite) signal

ON

With

Out of Service

Level 0

Tester Display Description

Tester Display

Description

Range

*1

Occurrence time

Indicates date of the DCM (telematics transceiver) operation.

-

*2

Operation Code

Indicates the Operation Code.

-

*3

Function

Items

Indicates the function name.

-

Common

  • GNSS (Satellite)
  • Collision Detection
  • Network Power Supply Control
  • SMS
  • Telematics PF
  • Failure Due to Conflict
  • Activate Function

Emergency Call

  • Emergency Call
  • Automatic Maintenance
  • Manual Maintenance

*4

Content

Indicates the content.

-

*5

Roaming

Indicates whether roaming was used for the communication network.

ON or OFF

*6

Voice Call

Indicates whether there was a voice call.

With or Without

*7

Service Area

Indicates whether the vehicle was in the service area.

Out of Service, Within Range, OFF the Air or Start up (LTE)

*8

Electric Level

Indicates the strength of the cellular signal received by the vehicle.

Level 0, Level 1, Level 2, Level 3, Level 4, Level 5