- The manual (SOS) switch red indicator illuminates
-
Replace mobilephone battery
![2020 - 2025 MY RAV4 RAV4 HV [10/2019 - ]; CELLULAR COMMUNICATION: MAYDAY BATTERY: REMOVAL](/t3Portal/stylegraphics/info.gif)
| Last Modified: 05-08-2025 | 6.11:8.1.0 | Doc ID: RM1000000026S7V |
| Model Year Start: 2023 | Model: RAV4 | Prod Date Range: [10/2022 - ] |
| Title: CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: VEHICLE CONTROL HISTORY (RoB); 2023 - 2025 MY RAV4 RAV4 HV [10/2022 - ] | ||
VEHICLE CONTROL HISTORY (RoB)
NOTICE:
Make sure to record any output Vehicle Control History (RoB) codes before clearing them and checking the Vehicle Control History (RoB) again.
CHECK VEHICLE CONTROL HISTORY (RoB)
Body Electrical > Telematics > Utility
|
Tester Display |
|---|
|
Vehicle Control History (RoB) |
Vehicle Control History Item
|
Code |
Tester Display |
Description |
Diagnostic Note |
|---|---|---|---|
|
X2210 |
Life Cycle of DCM Backup Battery |
When the system detects that the mobilephone battery has reached the end of its lifespan. |
NOTICE:
|
|
X2211 |
Low DCM Backup Battery Charge |
When the mobilephone battery charge is low. |
- |
|
X2601 |
Software Inconsistency with ENG/HV Control Module |
The VIN number received via CAN communication does not match that stored in the DCM. |
|
|
X2213 |
Emergency Call Switch Stuck On |
The manual (SOS) switch is on for 5 minutes or more. |
|
|
X2214 |
Communication Blackout from Power Distribution Controller ECU |
Lost Communication with ECM |
Check CAN Communication System for HV Model:
for Gasoline Model:
|
|
X2212 |
Diagnostics Communication Flow Failure |
Diagnostics communication flow failure (ID, Mode/SID difference). |
- |
|
X2215 |
Non Approval of the Reprograming |
User did not approve software update. |
- |
|
X2216 |
Failure of the Reprogramming |
Software writing failed. |
- |
|
X2217 |
Inconsistent Startup Software |
Software writing succeeded, but started software does not match package. |
- |
|
X21D4 |
Reprograming Telematics ECU by OTA Start/Finish |
The software update of DCM by OTA is started and completed with success. |
- |
CLEAR VEHICLE CONTROL HISTORY (RoB)
NOTICE:
By performing this procedure, all stored Vehicle Control History (RoB) will be cleared.
Body Electrical > Telematics > Utility
|
Tester Display |
|---|
|
Vehicle Control History (RoB) |
(b) According to the display on the GTS, clear the Vehicle Control History (RoB).
|
|