Last Modified: 05-08-2025 6.11:8.1.0 Doc ID: RM1000000026THX
Model Year Start: 2023 Model: RAV4 Prod Date Range: [10/2022 -           ]
Title: A25A-FKS (ENGINE CONTROL): CRANKSHAFT POSITION SENSOR: REMOVAL; 2023 - 2025 MY RAV4 [10/2022 -        ]

REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE STARTER ASSEMBLY

  • w/ Stop And Start System:

    Click here 2023 MY RAV4 [10/2022 - 10/2023]; A25A-FKS (STARTING): STARTER (w/ Stop And Start System): REMOVAL 2024 - 2025 MY RAV4 [10/2023 -        ]; A25A-FKS (STARTING): STARTER (w/ Stop And Start System): REMOVAL

  • w/o Stop And Start System:

    Click here 2023 MY RAV4 [10/2022 - 10/2023]; A25A-FKS (STARTING): STARTER (w/o Stop And Start System): REMOVAL 2024 - 2025 MY RAV4 [10/2023 -        ]; A25A-FKS (STARTING): STARTER (w/o Stop And Start System): REMOVAL

2. REMOVE CRANKSHAFT POSITION SENSOR

(a) Disconnect the crankshaft position sensor connector.

(b) Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.

NOTICE:

If the crankshaft position sensor has been struck or dropped, replace it.

(c) Perform this procedure only when reusing the crankshaft position sensor.

(1) Remove the O-ring from the crankshaft position sensor.

NOTICE:

  • Make sure to only remove the O-ring with bare hands.
  • When removing the O-ring, be careful not to damage the O-ring groove of the crankshaft position sensor.
  • If the O-ring groove of the crankshaft position sensor is damaged, replace the crankshaft position sensor with a new one.

*1

O-ring