Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM1000000027O7P
Model Year Start: 2023 Model: RAV4 Prod Date Range: [10/2022 -           ]
Title: TELEMATICS: TELEMATICS SYSTEM: UTILITY; 2023 - 2024 MY RAV4 RAV4 HV [10/2022 -        ]

UTILITY

CANCEL COMMUNICATION FUNCTION PAUSING

HINT:

This function is used to cancel communication function pausing mode

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Telematics / Utility / Cancel Communication Function Pausing.

Body Electrical > Telematics > Utility

Tester Display

Cancel Communication Function Pausing

ALL READINESS

HINT:

  • With "All Readiness", you can check whether or not the DTC judgment has been completed by using the Techstream.
  • You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Clear the DTCs even if no DTCs are stored.

Body Electrical > Telematics > Clear DTCs

(e) Turn the ignition switch off and wait for 2 minutes or more.

(f) Turn the ignition switch to ON.

(g) Perform the DTC judgment driving pattern to run the DTC judgment.

(h) Enter the following menus: Body Electrical / Telematics / Utility / All Readiness.

Body Electrical > Telematics > Utility

Tester Display

All Readiness

(i) Input the DTC to be confirmed.

(j) Check the DTC judgment result.

Techstream Display

Description
If the judgment result shows Incomplete or N/A, perform the DTC confirmation driving pattern again.

Normal
  • DTC judgment completed
  • System normal

Abnormal
  • DTC judgment completed
  • System abnormal

Incomplete
  • DTC judgment not completed
  • Perform the driving pattern

N/A
  • Unable to perform DTC judgment
  • Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit
  • Perform the driving pattern

(k) Turn the ignition switch off.

HINT:

This function is used to clear the history information of DCM (telematics transceiver).

HISTORY INFORMATION CLEAR

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Telematics / Utility / History Information Clear.

Body Electrical > Telematics > Utility

Tester Display

History Information Clear