Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000002FQ1X
Model Year Start: 2024 Model: RAV4 Prod Date Range: [10/2023 -           ]
Title: DOOR / HATCH: POWER BACK DOOR SYSTEM: INITIALIZATION; 2024 MY RAV4 RAV4 HV [10/2023 -        ]

INITIALIZATION

INITIALIZE MULTIPLEX NETWORK DOOR ECU

NOTICE:

Initialization of the multiplex network door ECU (back door initial position learning) is necessary if the following work procedures are performed while the back door is open.

  • The cable to the negative (-) auxiliary battery terminal is connected.
  • A power source system fuse of the power back door system is disconnected and reconnected.
  • The multiplex network door ECU is replaced or the connectors are disconnected.
  • The power back door unit assembly set LH/RH is removed and installed or replaced.

The power back door does not operate unless the multiplex network door ECU is initialized.

HINT:

  • Initialization is not necessary if the above procedures are performed while the back door is closed.
  • When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

    Click here 2024 MY RAV4 RAV4 HV [10/2023 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION

(a) Initialization operation

(1) Fully close the back door by hand.