Total Distance Traveled
|
Total distance traveled
|
0 to 16777215
|
Same as actual total distance traveled
|
For the unit, refer to "Total Distance Traveled - Unit"
|
Total Distance Traveled - Unit
|
Total Distance Traveled - unit
|
km or mile
|
km: km
mile: mile
|
-
|
Back Door Lock Status
|
Back door condition signal
|
Lock or Unlock
|
Lock: Back door locked
Unlock: Back door unlocked
|
-
|
Half Latch Switch
|
Latch switch signal
|
ON or OFF
|
ON: When in the open latch or overstroke position
OFF: Half latch position → full latch position
|
-
|
Closer Position Switch
|
Initial switch signal
|
ON or OFF
|
ON: Back door lock sector gear in center position (Initial switch on)
OFF: Back door lock sector gear out of center position (Initial switch off)
|
-
|
Pawl Switch
|
Pawl switch signal
|
ON or OFF
|
ON: Back door lock motor open-latched
OFF: Back door lock motor except open latched
|
-
|
Courtesy Switch
|
Back door courtesy switch signal
|
ON or OFF
|
ON: Open latch position → half latch position
OFF: Full latch position → overstroke position
|
-
|
PBD Main Switch
|
Power back door ON/OFF signal
|
ON or OFF
|
Current customize setting displayed
|
-
|
PBD Close Switch
|
No. 1 power back door control switch signal
|
ON or OFF
|
ON: No. 1 power back door control switch pushed
OFF: No. 1 power back door control switch not pushed
|
-
|
IG Switch
|
Ignition switch signal
|
ON or OFF
|
ON: Ignition switch ON
OFF: Ignition switch off
|
"OFF" is also displayed for this item when the ignition switch to ACC.
|
Kick Sensor Function
|
Status of the hands free power back door function*
|
ON or OFF
|
ON: Hands free power back door ON
OFF: Hands free power back door off
|
-
|
Door Lock Signal
|
Back door condition signal
|
Lock or Unlock
|
Lock: Back door locked
Unlock: Back door unlocked
|
-
|
Status of Kick Sensor Detection
|
Kick door control sensor ON detection status*
|
ON or OFF
|
ON: Kick door control sensor ON detected
OFF: Kick door control sensor ON not detected
|
-
|
Status of Kick Sensor Abnormal
|
Kick door control sensor abnormal condition*
|
Normal or Abnormal
|
Normal: Kick door control sensor normal
Abnormal: Kick door control sensor abnormal
|
-
|
Kick Sensor Installation
|
Kick door control sensor installed condition*
|
ON or OFF
|
ON: Kick door control sensor incorrectly installed
OFF: Kick door control sensor correctly installed
|
-
|
PBD Touch Sensor RH
|
Power back door sensor assembly RH signal
|
ON, OFF or Open
|
ON: Power back door sensor assembly RH pressed
OFF: Power back door sensor assembly RH not pressed
Open: Power back door sensor assembly RH circuit open
|
-
|
PBD Touch Sensor LH
|
Power back door sensor assembly LH signal
|
ON, OFF or Open
|
ON: Power back door sensor assembly LH pressed
OFF: Power back door sensor assembly LH not pressed
Open: Power back door sensor assembly LH circuit open
|
-
|
Correction of Back Door Position
|
Correction of back door position
|
Not Complied With or Complied With
|
Not Complied With: not complied with
Complied With: complied with
|
-
|
PBD Close Switch Operation History
|
Power back door control switch operation history
|
ON or OFF
|
ON: Has operation history
OFF: No operation history
|
The operation history will be cleared by disconnecting the cable from the negative (-) terminal of the auxiliary battery for approximately 30 seconds.
|
Close & Lock Switch Operation History
|
Back door control switch operation history
|
ON or OFF
|
ON: Has operation history
OFF: No operation history
|
Although the item is displayed on the GTS, it is not applicable to this vehicle
|
Kick Sensor Status
|
Kick Sensor condition signal*
|
Normal, Sensitivity Low (Noise), Stop (Foreign Objects), Sensitivity Low (Noise) & Stop (Foreign Objects), Stop (Battery Protection), Sensitivity Low (Noise) & Stop (Battery Protection), Stop (Foreign Objects) & Stop (Battery Protection) or Sensitivity Low (Noise) & Stop (Foreign Objects) & Stop (Battery Protection)
|
Normal: Kick sensor detection status normal
Sensitivity Low (Noise): Kick sensor detection sensitivity decreased due to noise
Stop (Foreign Objects): Kick sensor detection stopped due to foreign objects
Sensitivity Low (Noise) & Stop (Foreign Objects): Kick sensor sensitivity decreased due to noise and detection stopped due to foreign objects
Stop (Battery Protection): Kick sensor detection stopped due to battery protection
Sensitivity Low (Noise) & Stop (Battery Protection): Kick sensor sensitivity decreased due to noise and detection stopped due to battery protection
Stop (Foreign Objects) & Stop (Battery Protection): Kick sensor detection stopped due to foreign objects and battery protection
Sensitivity Low (Noise) & Stop (Foreign Objects) & Stop (Battery Protection): Kick sensor sensitivity decreased due to noise and detection stopped due to foreign objects and battery protection
|
-
|
Opened Number of Times
|
Number of times for back door opened
|
0 to 214783647
|
Number of times for back door opened
|
-
|
Closed Number of Times
|
Number of times for back door closed
|
0 to 214783647
|
Number of times for back door closed
|
-
|
PBD SW Operating Condition Setting
|
Back door control switch operation
|
ON or 0.8s
|
Current customize setting displayed
|
-
|
PBD Buzzer Function
|
Status of the power back door warning buzzer
|
ON or OFF
|
Current customize setting displayed
|
-
|
PBD Assist Close Function
|
Function that enables/disables the power back door assist close operation. When set to ON, the back door will close automatically when operated in the close direction manually.
|
ON or OFF
|
Current customize setting displayed
|
-
|
PBD Assist Open Function
|
Function that enables/disables the power back door assist open operation. When set to ON, the back door will open automatically when the back door opener switch assembly (open switch) is operated.
|
ON or OFF
|
Current customize setting displayed
|
-
|
PBD Door Unlock with One Motion Setting
|
Door or doors to be unlocked when back door locked and power back door operated by pressing transmitter switch (electrical key transmitter sub-assembly).
|
Back Door or All Doors
|
Current customize setting displayed
|
-
|
PBD Wireless Function
|
Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly).
|
ON or OFF
|
Current customize setting displayed
|
-
|
PBD Wireless One Motion Function
|
Wireless one motion function
|
ON or OFF
|
Current customize setting displayed
|
-
|
PBD Wireless SW Setting
|
Wireless operation setting condition
|
1 Time Press, 2 Times Press or Long Press (0.8s)
|
Current customize setting displayed
|
-
|
PBD Kick Sensor Sensitivity Adjust
|
Function that changes the sensitivity of the kick sensor.*
|
Normal, +1, +2 or Unknown
|
Current customize setting displayed
|
-
|
PBD Kick-in Beep Sound
|
Function that sounds a buzzer when a kick operation detected.*
|
ON or OFF
|
Current customize setting displayed
|
-
|