Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000002FQG3
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: AXLE AND DIFFERENTIAL: REAR DIFFERENTIAL CARRIER ASSEMBLY: REMOVAL; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]

REMOVAL

PROCEDURE

1. DRAIN DIFFERENTIAL OIL

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; MAINTENANCE: DIFFERENTIAL OIL: REPLACEMENT

2. REMOVE PROPELLER SHAFT ASSEMBLY

Click here 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]; DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY: REMOVAL

3. REMOVE REAR STABILIZER BAR

Click here 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; REAR SUSPENSION: REAR STABILIZER BAR: REMOVAL 2019 - 2020 MY RAV4 RAV4 HV [02/2019 - 08/2020]; REAR SUSPENSION: REAR STABILIZER BAR: REMOVAL 2021 - 2024 MY RAV4 RAV4 HV [08/2020 -        ]; REAR SUSPENSION: REAR STABILIZER BAR: REMOVAL

4. REMOVE NO. 1 FUEL TANK PROTECTOR

Click here 2019 - 2024 MY RAV4 [11/2018 -        ]; A25A-FKS (FUEL): FUEL TANK (w/ Canister Pump Module): INSTALLATION+

5. REMOVE REAR DRIVE SHAFT ASSEMBLY LH

Click here 2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; DRIVE SHAFT / PROPELLER SHAFT: REAR DRIVE SHAFT ASSEMBLY: REMOVAL 2019 - 2021 MY RAV4 RAV4 HV [02/2019 - 12/2021]; DRIVE SHAFT / PROPELLER SHAFT: REAR DRIVE SHAFT ASSEMBLY: REMOVAL 2022 - 2024 MY RAV4 RAV4 HV [12/2021 -        ]; DRIVE SHAFT / PROPELLER SHAFT: REAR DRIVE SHAFT ASSEMBLY: REMOVAL

6. REMOVE REAR DRIVE SHAFT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

7. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

(a) Disengage the 2 wire harness clamps to separate the wire harness.

Connector

Breather Tube

Bolt

(b) Disconnect the 2 connectors.

(c) Remove the bolt and wire harness clamp bracket.

(d) Remove the breather tube.

(e) Support the rear differential carrier assembly with a transmission jack.

(f) Remove the 3 bolts and 2 rear lower differential mount stoppers.

(g) Slowly lower the jack and then tilt the rear differential carrier assembly.

8. REMOVE REAR NO. 1 DIFFERENTIAL SUPPORT

(a) Remove the upper rear differential mount stopper from the rear No. 1 differential support.

(b) Remove the 2 bolts and rear No. 1 differential support from the rear differential carrier assembly.

9. REMOVE REAR NO. 2 DIFFERENTIAL SUPPORT

(a) Remove the upper rear differential mount stopper from the rear No. 2 differential support.

(b) Remove the 2 bolts and rear No. 2 differential support from the rear differential carrier assembly.

10. REMOVE REAR DIFFERENTIAL SUPPORT

(a) Remove the 4 bolts and rear differential support from the rear differential carrier assembly.