| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000002GOBM |
| Model Year Start: 2024 | Model: RAV4 | Prod Date Range: [10/2023 - ] |
| Title: THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): HOW TO PROCEED WITH TROUBLESHOOTING; 2024 MY RAV4 [10/2023 - ] | ||
|
HOW TO PROCEED WITH TROUBLESHOOTING |
CAUTION / NOTICE / HINT
HINT:
- Replace parts related to the wireless door lock control system and smart key system according to the inspection procedure.
-
If the wireless door lock control system and smart key system does not operate, first check the customize item and make sure that the wireless door lock control system and smart key system is not turned off.
Click here
![2023 - 2024 MY RAV4 [10/2022 - ]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): CUSTOMIZE PARAMETERS](/t3Portal/stylegraphics/info.gif)
-
The wireless door lock control system and smart key system primarily uses the following systems.
- Power door lock control system
- Wireless door lock control system
- Smart key system (for Entry Function)
-
Smart key system (for Start Function)
- : Immobiliser function
- When 2 or more keys are registered, perform the inspection with another key.
PROCEDURE
|
1. |
VEHICLE BROUGHT TO WORKSHOP |
(a) Confirm how vehicle was brought to workshop.
- Vehicle was driven
- Vehicle was towed
HINT:
The malfunction location may be narrowed down by confirming whether the vehicle was driven or towed.
|
|
2. |
CUSTOMER PROBLEM ANALYSIS |
HINT:
- In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
- Gather as much information as possible for reference. Past malfunctions that seem unrelated may also help in some cases.
-
The following 5 items are important points for problem analysis:
What
Vehicle model, system name
When
Date and time, frequency, whether the problem occurred recently or has been occurring for a long time
Where
Whether the problem occurs at specified location
Under what conditions?
Whether the doors were locked or unlocked, whether the engine switch was on (IG), whether the engine was running
How did it happen?
Ask the customer for details about the vehicle operating conditions, environment and malfunction.
|
|
3. |
BASIC CHECK |
(a) Measure the battery voltage.
Standard voltage:
11 to 14 V
HINT:
- A simple method to determine whether the battery is depleted is to operate the horn.
- If the battery voltage is below 11 V, recharge or replace the battery.
(b) Check for blown fuses, open or shorted wire harnesses, improperly connected connectors and other problems in areas that can be visually inspected.
(c) Check the connections of each connector and check them for deformation or damage.
|
|
4. |
CHECK FOR DTCS AND SAVE OPERATION HISTORY |
(a) Using the Techstream, enter the following menus: Health Check.
HINT:
- If DTCs are output, first perform troubleshooting for the DTCs.
- Save all output DTCs and operation history.
-
Operation history can also be checked using the "Utility" menu of the Techstream.
Click here
|
Result |
Proceed to |
|---|---|
|
No DTCs are output |
A |
|
Wireless door lock control system and smart key system DTCs are output |
B |
|
DTCs other than wireless door lock control system and smart key system DTCs are output |
C |
| B |
|
GO TO DIAGNOSTIC TROUBLE CODE CHART |
| C |
|
GO TO DIAGNOSTIC TROUBLE CODE CHART |
|
|
5. |
CHECK PROBLEM SYMPTOMS |
(a) Based on the customer problem analysis, check the problem symptoms.
-
Smart key system (for Start Function):
Click here
-
Smart key system (for Entry Function):
Click here
|
Result |
Proceed to |
|---|---|
|
The problem symptom can be confirmed |
A |
|
The problem symptom cannot be confirmed |
B |
| B |
|
|
|
6. |
CHECK CUSTOMIZE ITEMS |
(a) Use the following customize setting methods to confirm that the smart key system is on.
- Check setting using Techstream
- Check setting on multi-display
- Check setting by manual operation
Check for the customize setting.
Click here
(b) Use the following customize setting methods to confirm that the wireless door lock control system is on.
- Check setting using Techstream
- Check setting by manual operation
Check for the customize setting.
Click here
(c) w/ Hands Free Power Back Door:
Use the following customize setting methods to confirm that the power back door system is on.
- Check setting using Techstream
- Check setting on combination meter assembly
Check for the customize setting.
Click here
HINT:
- Even when the smart key system is turned off in the customize setting, the engine can be started by an emergency key operation.
- If the smart key system, wireless door lock control system or power back door system is off, all smart key functions, wireless functions or power back door functions do not operate.
|
Result |
Proceed to |
|---|---|
|
Wireless door lock control system and smart key system are on |
A |
|
Smart key system is off |
B |
|
Wireless door lock control system is off |
C |
|
Power back door system is off |
D |
| B |
|
| C |
|
| D |
|
|
|
7. |
CHECK POWER DOOR LOCK CONTROL SYSTEM |
(a) Check the power door lock control system.
Click here
|
Result |
Proceed to |
|---|---|
|
Power door lock control system operates properly |
A |
|
Power door lock control system does not operate properly |
B |
| B |
|
GO TO POWER DOOR LOCK CONTROL SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) |
|
|
8. |
CHECK WIRELESS DOOR LOCK CONTROL SYSTEM |
(a) Check the wireless door lock control system.
Click here
|
Result |
Proceed to |
|---|---|
|
All functions operate properly |
A |
|
Wireless lock/unlock function does not operate (smart key function also does not operate) |
B |
|
Wireless lock/unlock function does not operate (smart key function operates) |
C |
|
Only back door open function does not operate |
D |
|
Door ajar warning function does not operate |
E |
|
Answer-back (buzzer sounds and hazard lights flash) function does not operate |
F |
| B |
|
| C |
|
REPLACE ELECTRICAL KEY TRANSMITTER SUB-ASSEMBLY |
| D |
|
GO TO POWER BACK DOOR SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) |
| E |
|
| F |
|
|
|
9. |
CHECK SMART KEY SYSTEM (for Entry Function) |
(a) Check the smart key system.
Click here
|
Result |
Proceed to |
|---|---|
|
All functions operate properly |
A |
|
Entry lock/unlock function does not operate from all doors (wireless function also does not operate) |
B |
|
Entry lock/unlock function does not operate from all doors (wireless function operates) |
C |
|
Entry lock function/unlock function do not operate only from driver side door |
D |
|
Entry lock function/unlock function do not operate only from front passenger side door |
E |
|
Entry lock function/unlock function do not operate only from rear door LH*1 |
F |
|
Entry lock function/unlock function do not operate only from rear door RH*1 |
G |
|
Entry lock function does not operate only from driver side door (unlock operates) |
H |
|
Entry lock function does not operate only from front passenger side door (unlock operates) |
I |
|
Entry lock function does not operate only from rear door LH (unlock operates)*1 |
J |
|
Entry lock function does not operate only from rear door RH (unlock operates)*1 |
K |
|
Entry unlock function does not operate only from driver side door (lock operates) |
L |
|
Entry unlock function does not operate only from front passenger side door (lock operates) |
M |
|
Entry unlock function does not operate only from rear door LH (lock operates)*1 |
N |
|
Entry unlock function does not operate only from rear door RH (lock operates)*1 |
O |
|
Back door lock function/unlock function do not operate |
P |
|
Back door lock function does not operate |
Q |
|
Back door unlock function does not operate |
R |
|
Smart key system exterior warning and answer-back buzzer do not sound |
S |
|
Smart key system interior warning does not sound |
T |
|
Entry unlock and unlatch functions do not operate using kick sensor*2 |
U |
- *1: w/ Rear Door Entry
- *2: w/ Hands Free Power Back Door
| B |
|
| C |
|
| D |
|
| E |
|
| F |
|
| G |
|
| H |
|
GO TO SMART KEY SYSTEM (for Entry Function) (Driver Side Door Entry Lock Function does not Operate) |
| I |
|
| J |
|
GO TO SMART KEY SYSTEM (for Entry Function) (Rear Door LH Entry Lock Function does not Operate) |
| K |
|
GO TO SMART KEY SYSTEM (for Entry Function) (Rear Door RH Entry Lock Function does not Operate) |
| L |
|
| M |
|
| N |
|
GO TO SMART KEY SYSTEM (for Entry Function) (Rear Door LH Entry Unlock Function does not Operate) |
| O |
|
GO TO SMART KEY SYSTEM (for Entry Function) (Rear Door RH Entry Unlock Function does not Operate) |
| P |
|
| Q |
|
GO TO SMART KEY SYSTEM (for Entry Function) (Back Door Entry Lock Function does not Operate) |
| R |
|
GO TO SMART KEY SYSTEM (for Entry Function) (Back Door Entry Unlock Function does not Operate) |
| S |
|
| T |
|
GO TO SMART KEY SYSTEM (for Entry Function) (Entry Interior Alarm does not Sound) |
| U |
|
|
|
10. |
CHECK SMART KEY SYSTEM (for Start Function) |
(a) Check the smart key system.
Click here
Engine was started
|
Result |
Proceed to |
|---|---|
|
All functions operate properly |
A |
|
Power source mode changing function does not operate (power source mode does not change to on (ACC), but changes to on (IG)) |
B |
|
Security indicator light does not blink |
C |
Engine was not started
|
Result |
Proceed to |
|---|---|
|
Push-button start function does not operate |
D |
|
Immobiliser function does not operate |
E |
|
Power source mode changing function does not operate (does not change to on (ACC) or on (IG)) |
F |
|
Power source mode changing function does not operate (changes to on (ACC), but not on (IG)) |
G |
|
Immobiliser function does not operate (Security indicator light does not turn off) |
H |
| B |
|
GO TO SMART KEY SYSTEM (for Start Function) (Power Source Mode does not Change to ON (ACC)) |
| C |
|
GO TO SMART KEY SYSTEM (for Start Function) (Security Indicator Light Does not Blink) |
| D |
|
GO TO SMART KEY SYSTEM (for Start Function) (Engine does not Start) |
| E |
|
GO TO SMART KEY SYSTEM (for Start Function) (Immobiliser System does not Operate Properly) |
| F |
|
GO TO SMART KEY SYSTEM (for Start Function) (Power Source Mode does not Change to ON (IG and ACC)) |
| G |
|
GO TO SMART KEY SYSTEM (for Start Function) (Power Source Mode does not Change to ON (IG)) |
| H |
|
GO TO SMART KEY SYSTEM (for Start Function) (Immobiliser System does not Operate Properly) |
|
|
11. |
INSPECT ELECTRICAL KEY REGISTRATION FUNCTION |
(a) Check the electrical key registration function for malfunctions.
Refer to the Registration.
Click here
|
Result |
Proceed to |
|---|---|
|
All functions operate properly |
A |
|
Cannot register new keys |
B |
|
Cannot register additional keys |
C |
|
Additional key registration display is not displayed |
D |
| A |
|
| B |
|
GO TO SMART KEY SYSTEM (for Start Function) (New Key cannot be Registered) |
| C |
|
GO TO SMART KEY SYSTEM (for Start Function) (Additional Key cannot be Registered) |
| D |
|
GO TO SMART KEY SYSTEM (for Start Function) (New Key Registration Warning Message is not Displayed) |
|
|