Last Modified: 02-14-2025 |
6.11:8.1.0 |
Doc ID: RM100000002PXY4 |
Model Year Start: 2024 |
Model: RAV4 |
Prod Date Range: [10/2023 - 11/2024] |
Title: LIGHTING (INT): LIGHTING SYSTEM: DATA LIST / ACTIVE TEST; 2024 MY RAV4 RAV4 HV [10/2023 - 11/2024] |
DATA LIST / ACTIVE TEST
DATA LIST (Type A)
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > Main Body > Data List
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
FR Door Lock Position Switch Status
|
Front door RH unlock detection switch signal
|
Unlock or Lock
|
Unlock: Front door LH unlocked
Lock: Front door LH locked
|
-
|
FL Door Lock Position Switch Status
|
Front door LH unlock detection switch signal
|
Unlock or Lock
|
Unlock: Front door RH unlocked
Lock: Front door RH locked
|
-
|
RR Door Lock Position Switch Status
|
w/ Memory
-
Rear door RH unlock detection switch signal
|
Unlock or Lock
|
Unlock: Rear door RH unlocked
Lock: Rear door RH locked
|
-
|
RL Door Lock Position Switch Status
|
w/o Memory
-
Rear door LH and RH unlock detection switch signal
w/ Memory
-
Rear door LH unlock detection switch signal
|
Unlock or Lock
|
w/o Memory
-
Unlock: Rear door RH or LH unlocked
-
Lock: Rear door RH and LH locked
w/ Memory
-
Unlock: Rear door LH unlocked
-
Lock: Rear door LH locked
|
-
|
Back Door Lock Position Status
|
Back door unlock detection switch signal
|
Unlock or Lock
|
Unlock: Back door unlocked
Lock: Rear door LH locked
|
-
|
FR Door Courtesy Switch Status
|
Front door courtesy light switch RH signal
|
Close or Open
|
Close: Front door RH closed
Open: Front door RH open
|
-
|
FL Door Courtesy Switch Status
|
Front door courtesy light switch LH signal
|
Close or Open
|
Close: Front door LH closed
Open: Front door LH open
|
-
|
RR Door Courtesy Switch Status
|
Rear door courtesy light switch RH signal
|
Close or Open
|
Close: Rear door RH closed
Open: Rear door RH open
|
-
|
RL Door Courtesy Switch Status
|
Rear door courtesy light switch LH signal
|
Close or Open
|
Close: Rear door LH closed
Open: Rear door LH open
|
-
|
Back Door Courtesy Switch Status
|
Back door courtesy light switch signal
|
Close or Open
|
Close: Back door closed
Open: Back door open
|
-
|
ACC Power
|
Ignition switch ACC signal
|
OFF or ON
|
OFF: Ignition switch off
ON: Ignition switch ACC
|
-
|
IGR Power
|
Ignition switch ON signal
|
OFF or ON
|
OFF: Ignition switch off
ON: Ignition switch ON
|
-
|
Communication Illumination Module "A"
|
Illumination module A connection status
|
STOP or OK
|
STOP: Not connected
OK: Connected
|
Although the item is displayed on the GTS, it is not applicable to this vehicle.
|
Communication Illumination Module "B"
|
Illumination module B connection status
|
STOP or OK
|
STOP: Not connected
OK: Connected
|
Although the item is displayed on the GTS, it is not applicable to this vehicle.
|
Communication of Color Illumination Module "A"
|
Color illumination module A connection status
|
STOP or OK
|
STOP: Not connected
OK: Connected
|
Although the item is displayed on the GTS, it is not applicable to this vehicle.
|
Communication of Color Illumination Module "B"
|
Color illumination module B connection status
|
STOP or OK
|
STOP: Not connected
OK: Connected
|
Although the item is displayed on the GTS, it is not applicable to this vehicle.
|
Communication of Color Illumination Module "C"
|
Color illumination module C connection status
|
STOP or OK
|
STOP: Not connected
OK: Connected
|
Although the item is displayed on the GTS, it is not applicable to this vehicle.
|
Interior Lights ON when Approached Function
|
Function that lights up the interior lights when the electrical key transmitter is brought near the vehicle
|
Disable or Enable
|
Customize setting displayed
|
-
|
Interior Lights ON when Door Unlocked Function
|
Function that lights up the interior lights when the doors are unlocked by an unlock operation
|
Disable or Enable
|
Customize setting displayed
|
-
|
Interior Lights ON when IG OFF Function
|
Function that lights up the interior lights when the ignition switch is turned from ON to off
|
Disable or Enable
|
Customize setting displayed
|
-
|
Light Control Function
|
Function that dims the interior lights when the ignition switch is ON and the shift lever is moved to any position other than P
|
Disable or Enable
|
Customize setting displayed
|
-
|
Interior Illumination Light 1 Function
|
Function that lights up the interior light 1 when the map light sub-assembly is illuminated
|
Disable or Enable
|
Customize setting displayed
|
-
|
DATA LIST (Type B)
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > Main Body > Data List
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
ACC SW
|
Ignition switch ACC signal
|
OFF or ON
|
ON: Ignition switch ACC
OFF: Ignition switch off
|
"ON" is also displayed for this item when the ignition switch is ON.
|
IG SW
|
Ignition switch ON signal
|
OFF or ON
|
ON: Ignition switch ON
OFF: Ignition switch off
|
"OFF" is also displayed for this item when the ignition switch is ACC.
|
RR Door Courtesy SW
|
Rear door courtesy light switch RH signal
|
OFF or ON
|
OFF: Rear door RH closed
ON: Rear door RH open
|
-
|
RL Door Courtesy SW
|
Rear door courtesy light switch LH signal
|
OFF or ON
|
OFF: Rear door LH closed
ON: Rear door LH open
|
-
|
Back Door Courtesy SW
|
Back door courtesy light switch signal
|
OFF or ON
|
OFF: Back door closed
ON: Back door open
|
-
|
FR Door Lock Pos
|
Front door RH unlock detection switch signal
|
LOCK or UNLOCK
|
LOCK: Front door RH locked
UNLOCK: Front door RH unlocked
|
-
|
FR Door Courtesy SW
|
Front door courtesy light switch RH signal
|
OFF or ON
|
OFF: Front door RH closed
ON: Front door RH open
|
-
|
FL Door Lock Pos
|
Front door LH unlock detection switch signal
|
LOCK or UNLOCK
|
LOCK: Front door LH locked
UNLOCK: Front door LH unlocked
|
-
|
FL Door Courtesy SW
|
Front door courtesy light switch LH signal
|
OFF or ON
|
OFF: Front door LH closed
ON: Front door LH open
|
-
|
RR-Door Lock Pos SW
|
Rear door RH unlock detection switch signal*1
Rear door RH and rear door LH unlock detection switch signal*2
|
OFF or ON
|
OFF: Rear door RH unlocked*1
OFF: Rear door RH and rear door LH unlocked*2
ON: Rear door RH locked*1
ON: Rear door RH or rear door LH locked*2
|
-
|
RL-Door Lock Pos SW
|
Rear door LH unlock detection switch signal*1
Rear door LH and rear door RH unlock detection switch signal*2
|
OFF or ON
|
OFF: Rear door LH unlocked*1
OFF: Rear door LH and rear door RH unlocked*2
ON: Rear door LH locked*1
ON: Rear door LH or rear door RH locked*2
|
-
|
Interior Light Control
|
Operation of the illuminated entry system
|
OFF or ON
|
Customized setting displayed
|
Displayed only when All Data is selected.
|
I/L ON W/Door Key Unlock
|
Function that lights up the interior lights when the doors are unlocked
|
OFF or ON
|
Customized setting displayed
|
Displayed only when All Data is selected.
|
Lighting Time
|
Lighting time of the delay control function (illuminated entry system)
|
15s, 7.5s or 30s
|
Customized setting displayed
|
Displayed only when All Data is selected.
|
Room Light when Aprchd
|
Function that lights up the interior lights when a key enters any actuation area
|
OFF or ON
|
Customized setting displayed
|
Displayed only when All Data is selected.
|
Inside Foot Light
|
Function that lights up the No. 1 interior illumination light assembly (footwell light)*3
|
OFF or ON
|
Customized setting displayed
|
Displayed only when All Data is selected.
|
I/L when ACC OFF
|
Function that lights up the interior lights when the ignition switch is turned from ACC or ON to off
|
OFF or ON
|
Customized setting displayed
|
Displayed only when All Data is selected.
|
Light Control
|
Function that lights up the ambient lights (while driving)
|
OFF or ON
|
Customized setting displayed
|
Displayed only when All Data is selected.
|
-
*1: w/ Memory Call Function
-
*2: w/o Memory Call Function
-
*3: w/ Footwell Light
ACTIVE TEST (Type A)
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus:
(1) Body Electrical / Main Body / Active Test.
(2) Body Electrical / Smart Key / Active Test.*
(e) Perform the Active Test according to the display on the Techstream.
Body Electrical > Main Body > Active Test
Tester Display
|
Measurement Item
|
Control Range
|
Diagnostic Note
|
Illuminated Entry System
|
Turns on the lights that are controlled by the illuminated entry system*1
|
OFF or ON
|
Perform the Active Test with the door linked switch of the map light sub-assembly and spot light assembly in the DOOR position.
|
Front Footwell Lights
|
Turns on the following lights:
-
No. 1 interior illumination light assembly (driver side footwell light)*2
-
No. 2 interior illumination light assembly (front passenger side footwell light)*2
-
No. 1 interior illumination light assembly (center tray light)*3
-
No. 1 interior illumination light assembly (driver side tray light)*3
-
Interior illumination light sub-assembly (front passenger side tray light)*3
-
Console box illumination light assembly*3
|
OFF or ON
|
w/ Footwell Light
|
Relay for Interior Light Auto Cut Function
|
DOME CUT relay
|
OFF or ON
|
When performing this Active Test, turn all the interior lights on.
-
OFF: DOME CUT relay on (interior lights turn on)
-
ON: DOME CUT relay off (interior lights turn off)
|
-
*1: Refer to Operation Check for the lights that are controlled by the illuminated entry system.
Click here
-
*2: w/ Tray Light
-
*3: w/ Cup Holder Light
Body Electrical > Smart Key > Active Test
Tester Display
|
Measurement Item
|
Control Range
|
Diagnostic Note
|
Power/Engine SW Light
|
Push start switch illumination
|
OFF or ON
|
-
|
ACTIVE TEST (Type B)
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus:
(1) Body Electrical / Main Body / Active Test.
(2) Body Electrical / Smart Key / Active Test.*
(e) Perform the Active Test according to the display on the Techstream.
Body Electrical > Main Body > Active Test
Tester Display
|
Measurement Item
|
Control Range
|
Diagnostic Note
|
Illuminated Entry System
|
Turns on the lights that are controlled by the illuminated entry system*1
|
OFF or ON
|
Perform the Active Test with the DOOR switch in the map light assembly and No. 1 room light assembly turned on.
|
Fr Foot Light
|
Operation of the following lights:
-
No. 1 interior illumination light assembly (footwell light)
-
No. 2 interior illumination light assembly (footwell light)
-
No. 3 interior illumination light assembly (center tray light)*2
-
No. 4 interior illumination light assembly (driver side tray light)*2
-
No. 5 interior illumination light assembly (front passenger side tray light)*2
-
No. 6 interior illumination light assembly (cup holder light)*3
|
OFF or ON
|
w/ Footwell Light
|
Relay for Interior Light Auto Cut Function
|
DOME CUT relay
|
DOME CUT relay
|
When performing this Active Test, turn all the interior lights on.
-
OFF: DOME CUT relay on (interior lights turn on)
-
ON: DOME CUT relay off (interior lights turn off)
|
Dimmer Signal
|
Outputs night mode (dimmer signal)
|
OFF or ON
|
-
|
-
*1: Refer to Operation Check for the lights that are controlled by the illuminated entry system.
Click here
-
*2: w/ Tray Light
-
*3: w/ Cup Holder Light
Body Electrical > Smart Key > Active Test
Tester Display
|
Measurement Item
|
Control Range
|
Diagnostic Note
|
Power/Engine SW Light
|
Push start switch illumination
|
OFF or ON
|
-
|
|