Last Modified: 02-14-2025 6.11:8.1.0 Doc ID: RM100000002Q1QH
Model Year Start: 2025 Model: RAV4 Prod Date Range: [11/2024 -           ]
Title: THEFT DETERRENT / KEYLESS ENTRY: THEFT DETERRENT SYSTEM: DATA LIST / ACTIVE TEST; 2025 MY RAV4 RAV4 HV [11/2024 -        ]

DATA LIST / ACTIVE TEST

DATA LIST

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main Body / Data List.

(e) According to the display on the Techstream, read the Data List.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

-

-

-

Not applicable

Total Distance Traveled - Unit

-

-

-

Not applicable

FR Door Lock Position Switch Status

Front door RH unlock detection switch

Lock or Unlock

Lock: Front door RH locked

Unlock: Front door RH unlocked

-

FL Door Lock Position Switch Status

Front door LH unlock detection switch

Lock or Unlock

Lock: Front door LH locked

Unlock: Front door LH unlocked

-

RR Door Lock Position Switch Status

Rear door RH unlock detection switch signal*2

Lock or Unlock

Lock: Rear door RH locked

Unlock: Rear door RH unlocked

-

RL Door Lock Position Switch Status

Rear door LH unlock detection switch signal*2

Rear door LH and RH unlock detection switch signal*3

Lock or Unlock

Lock: Rear door LH locked*2

Unlock: Rear door LH unlocked*2

Lock: Rear door RH and LH locked*3

Unlock: Rear door RH or LH unlocked*3

-

Back Door Lock Position Status

Back door unlock detection switch

Lock or Unlock

Lock: Back door locked

Unlock: Back door unlocked

-

FR Door Courtesy Switch Status

Front door courtesy light switch RH

Close or Open

Close: Front door RH closed

Open: Front door RH open

-

FL Door Courtesy Switch Status

Front door courtesy light switch LH

Close or Open

Close: Front door LH closed

Open: Front door LH open

-

RR Door Courtesy Switch Status

Rear door courtesy light switch RH

Close or Open

Close: Rear door RH closed

Open: Rear door RH open

-

RL Door Courtesy Switch Status

Rear door courtesy light switch LH

Close or Open

Close: Rear door LH closed

Open: Rear door LH open

-

Back Door Courtesy Switch Status

Back door courtesy light switch

Close or Open

Close: Back door closed

Open: Back door open

-

Hood Courtesy Switch Status

Engine hood courtesy switch

Close or Open

Close: Engine hood closed

Open: Engine hood open

-

Intrusion Sensor Cancel Switch

-

-

-

Not applicable

Glass Breakage Sensor

-

-

-

Not applicable

IGR Power

Ignition switch

ON or OFF

ON: Ignition switch ON

OFF: Ignition switch off

-

Key Unlock Warning Switch

Un-lock warning switch*1

ON or OFF

ON: Key inserted into ignition key cylinder

OFF: Key removed from ignition key cylinder

-

Intrusion Sensor 1

-

-

-

Not applicable

Intrusion Sensor Pre-detection

-

-

-

Not applicable

Intrusion Sensor 1 Connection

-

-

-

Not applicable

Sealed Glass Breakage Sensor

-

-

-

Not applicable

Communication Intrusion Sensor 1

-

-

-

Not applicable

Communication Intrusion Sensor 2

-

-

-

Not applicable
  • *1: w/o Smart Key System
  • *2: w/ Memory
  • *3: w/o Memory

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Main Body, Smart Key or Immobiliser / Active Test.

(e) According to the display on the Techstream, perform the Active Test.

Body Electrical > Main Body > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Security Indicator

Security indicator

OFF or ON

-

Vehicle Horn

Vehicle horn

OFF or ON

-

Security Horn

Security horn assembly

OFF or ON

-

Self Power Siren

Theft warning siren assembly

OFF or ON

Not applicable

Power for Intrusion Sensor

Theft warning ultrasonic and tilt sensor power supply

OFF or ON

Not applicable

(1) w/ Smart Key System

Body Electrical > Smart Key > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Immobiliser Indicator

Security indicator

ON or OFF

-

(2) w/o Smart Key System

Body Electrical > Immobiliser > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Security Indicator

Security indicator

ON or OFF

-